Connecting The Cwa-1 Using A Subwoofer/Lfe Output - PSB CWA-1 Installation Manual

Connecting to the CWA-1 Using a Subwoofer/LFE Output
Connecting from:
Benefits:
Challenges:
Receiver or Processor
with Internal Crossover
Sub/LFE Output
CWA-1
Subwoofer Out
Receiver or Processor
without Internal Crossover
Optional
Best Preamp or Receiver Settings
Subwoofer = Yes
Front Channels = Small
Crossover Frequency (where applicable) =
as desired; 80 - 100 Hz recommended
Dolby Pro Logic Digital 5.1, 7.1 Receiver or Processor
Simplest Connection
Some receivers may not send information to this output
when in stereo mode while playing back CDs, records, VCR,
or stereo satellite receiver
Best Settings for CWA-1
Crossover Frequency = 80 - 100 Hz
if using Subwoofer Output into
CWA-1 L or R Input if
Receiver/Processor does not
contain a subwoofer crossover
15
CWS8
4
CWS8
4
Optional