Advertisement
Use
WARNING: Never leave the appliance unattended while in use.
CAUTION: Use caution when handling the Pro Extractor Blades
CAUTION: We do not recommend grinding in any of our Nutri Ninja
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 1
Fig. 2
1
Place the motor base on a clean, dry, level surface such
as a counter or table top.
2
Add ingredients to the cup.
3
Place the blade onto the cup and twist it on tightly until
you have a good seal. (Fig. 1)
4
Turn the cup upside down and place it onto the motor
base, aligning the tabs on the cup with the motor base.
Turn it clockwise, the unit is ready for use. (Fig. 2)
5
Press down on the top of the cup in short intervals to
activate. (Fig. 3)
6
When you have reached your desired consistency, stop
the appliance by removing your hand from the cup.
Wait for the motor to stop running. Then turn the cup
anticlockwise (Fig. 4) and pull straight up to remove.
(Fig. 5)
7
0800 862 0453
PULSE
Fig. 3
For best results, use short "PULSES"!
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the Max fill line.
IMPORTANT: When processing soft dry
ingredients such as day-old bread or cheese
use quick, short 1 second pulses. Do not overfill
to avoid overheating the appliance. Allow the
appliance to cool after each use.
7
Turn the cup upright and remove the Pro Extractor
Blades by twisting the blade assembly anticlockwise.
Be sure to store the Pro Extractor Blades attached to an
empty cup when not in use.
8
Place the Sip & Seal lid onto the cup, twist to seal
and enjoy!
9
Make sure that the motor base is unplugged when
not in use.
as the blades are very sharp.
™
Cups.
®
REMOVAL
Fig. 4
Fig. 5
Advertisement
