Advertisement
Installation
Notice
The LNC IP Camera and the Client PC needs to connected to the same routing
device (such as Router, switch etc) or to each other.
Please make sure the DC Adapter or POE is correct.
When connecting the alarm input, please make sure the input DC level is lower
than 5V.
Installation Procedure
1. Connect the Network cable to the network device or directly to the client PC.
2. Connect the 12V DC adapter.
3. After connecting the DC power, the LED indicator will be turned on. The
Network Connection indicator (Green LED) will turn on after five seconds.
The data indicator (Orange LED) will blink, which shows that the physical
network connection of the IP Camera is finished.
System Configuration
The LNC IP Camera can be managed and maintained via the Web Interface. Prior to
logging on to the Web interface, please make sure:
LNC IP Camera has a network connection and the power is on.
When configured for the first time, the Client PC and the IP Camera must be on
the same network.
It is recommended to use the Microsoft Internet Explorer 6.0 or higher version,
preferably IE 8.0.
If the client PC is running Windows XP, please make sure the UPnP is enabled.
Web:
- 5 -
Leopard Imaging Inc.
1130 Cadillac Ct.
Milpitas, CA 95035
Phone: (408) 263-0988
Fax: (408) 217-1960
www.leopardimaging.com
Advertisement
