Power On Your Tablet - EE Robin User Manual

1.1 Setting up your device
1.1.1 Inserting your Micro SIM
Please note this device uses a Micro SIM - attempting to insert a
Nano size SIM card into your device may cause serious damage to
your tablet. For more help with your EE SIM pack, visit ee.co.uk/
simstart
• Pull out card cover and move clear of the slots
•
Take care to insert your Micro SIM in the correct direction to
avoid damage. The orientation is shown in the above diagram and
also marked on the sticker you will find next to the slots on your
tablet
• Optional – if you have purchased a compatible Micro SD card for
your tablet, follow the same instructions mentioned above
• Carefully close the card cover, ensuring firmly shut
6
1.1.2 Setup
Charging the battery
To charge your tablet, connect the charger to your tablet and mains
socket.
• When using your tablet for the first time, charge the battery fully.
To reduce power consumption and energy waste, when battery
is fully charged, disconnect your charger from the plug; switch off
Wi-Fi, GPS, Bluetooth or background-running apps when not
in use; reduce the backlight time, etc.
This device can be charged through USB computer connection,
though it will take more time.

1.1.3 Power on your tablet

Hold down the Power key until the tablet powers on, unlock your
tablet (Swipe, Pattern, PIN, and Password) if necessary and confirm.
The Home screen is displayed.
If you do not know your PIN code or if you have forgotten it, contact
your network operator. Do not leave your PIN code with your tablet.
Store this information in a safe place when it is not in use.
1.1.4 Power off your tablet
Hold down the Power key until the popup menu appears. Select
Power off to confirm.
7