Advertisement
Press the FUNCTION button for 4~8 seconds to disconnect the transmitter.
2）LED indicator status ("
POWER indicator: ON (once power on)
DATA indicator: ON with DMX signal and OFF without DMX signal.
TX indicator: OFF
RX indicator: ON
SIGNAL indicator:
Long time OFF, means no connection to any transmitter.
ON for 900 milliseconds and OFF for 100 milliseconds, means connection to transmitter but no DMX
signal.
Long time ON, means connection to transmitter and DMX signal
ON for 100 milliseconds and OFF for 100 milliseconds, means disconnection to transmitter or
connecting.
2. Transmitter Mode
1) FUNCTION button
Press the FUNCTION button for 100 milliseconds to 2 seconds to add transmitter.
Press the FUNCTION button for 4~8 seconds to disconnect all transmitters.
2）LED indicator status ("
POWER indicator: ON (once power on)
DATA indicator: ON with DMX signal and OFF without DMX signal.
TX indicator: ON
RX indicator: OFF
SIGNAL indicator:
ON for 900 milliseconds and OFF for 100 milliseconds, means no DMX signal.
Long time ON, means connection to DMX signal.
" / "OFF" means off, "
" / "OFF" means off, "
" / ON means on).
" / ON means on).
Advertisement
