HSS Hire 682 Operating & Safety Manual

Operating & Safety Guide 682
BASIC TECHNIQUES
Turn ON the fan' s ON/OFF switch followed by the
heat selector switch – never use the gun unless the
Hire Shops
fan is working properly.
Now simply play the air jet over the surface to be
stripped. Keeping the nozzle 100mm to 150mm (4in to
6in) away from it, until the paint is soft enough to be
scraped off.
While scraping, never point the gun at yourself, the
gun' s flex, or anything else that could be harmed or
damaged by the heat.
EQUIPMENT CARE
Never use the equipment except for its intended
purpose. If it will not do what you want with reasonable
ease, assume you have the wrong tool for the job.
Contact your local HSS Hire Shop for advice.
Keep the equipment clean. You will find this less of a
chore if you clean it regularly, rather than wait until the
end of the hire period.
When not in use, store the equipment somewhere
clean, dry and safe from thieves.
FINISHING OFF
Switch OFF and unplug the gun, then allow it to
Hot Air Paint
cool before refitting the fish-tail nozzle and neatly coiling
the flex ready for return to your local HSS Hire Shop.
Stripper
Electric hot air gun for the removal
of paint prior to redecorating.
Contact your local
0990 282828
©HSS Hire Service Group Plc 1997 No. 682/01
Group Office: 25 Willow Lane, Mitcham, Surrey CR4 4TS
Code 61112