Slau601A – March 2015 – Revised July - Texas Instruments BOOSTXL-K350QVG-S1 User Manual

Getting Started
1 Getting Started
1.1 Introduction
The BOOSTXL-K350QVG-S1 Kentec QVGA Display BoosterPack is an easy-to-use plug-in module for
adding a touch-screen color display to your LaunchPad kit design. MCU LaunchPad developers can use
this BoosterPack to start developing applications using the 320×240-pixel SPI-controlled TFT QVGA
display with resistive touch screen.
1.2 Key Features
• Kentec TFT LCD (part number: K350QVG-V2-F)
– 3.5-inch QVGA (320×240 resolution)
– SPI communication
– 4-wire resistive touch screen
– White LED backlight
• LED backlight driver circuit
• Complies with the BoosterPack standard for use with 20- and 40-pin LaunchPads
1.3 What's Included
1.3.1 Kit Contents
• One BOOSTXL-K350QVG-S1 BoosterPack Plug-in module
1.3.2 Software Examples
• MSP-EXP432P401R LaunchPad + BOOSTXL-K350QVG-S1 demos (see
– Graphics Library Example
1.4 Next Steps: Looking Into the Provided Code
After the EVM features have been explored, the fun can begin. It's time to open an integrated
development environment (IDE) and start looking at the code examples.
projects available to make it easy to understand the provided software.
2
BOOSTXL-K350QVG-S1 QVGA Display BoosterPack™ Plug-in Module
Copyright © 2015, Texas Instruments Incorporated
Section 3)
Section 3 describes the example
SLAU601A – March 2015 – Revised July 2015
Submit Documentation Feedback
www.ti.com