Burnside P355 Quick Start Manual

Burnside Telecom Limited
Opus House, Herriard, Basingstoke,
Hampshire, RG25 2PH, United Kingdom
Memory buttons
Use to store regular
contacts for quick
dialling.
The standby screen
When the phone is not involved in a call or any other operation, it will display a
screen similar to one of those shown below. In addition to the time, date, signal
strength and other status icons, you can choose to make it show the network name,
a big clock or a banner. Use the Settings option within the menu to determine which
standby screen is displayed - please refer to the full user guide for details.
Standby screen showing
Standby screen showing
network name the big clock
Tel: +44 (0)3333 441200 Part No.
Email: info@burnsidetelecom.com 362089
Web: www.burnsidetelecom.com rev 1.1a
Arrow keys Select Menu
Use to Use to Press to
control choose display
menu menu the setup
options. options. menu.
Handsfree
Press to begin handsfree
dialling or to answer an
incoming call without
picking up the handset.
Standby screen showing
the banner
BURNSIDE
landline alternatives
This quick start guide will help you to set up, switch on and begin using your
P355 desktop mobile phone. For further information, please refer to the full
user guide supplied with the product.
Setting up
Unlock the transit switch
When shipped, your phone is locked
for transit to prevent it from powering
on accidentally. You need to unlock the
phone before it will operate.
1 On the underside of the phone,
locate the recessed switch near to
where the handset cable attaches.
2 Slide the switch towards the rear of
the phone.
The phone will not switch on at this
stage.
P355 desktop mobile phone
quick start guide
Transit
switch
Install your SIM card
Note: Ensure the phone is switched off.
1 On the rear panel of the phone, carefully
swing open the SIM slot door.
2 Orientate your SIM card with its contacts
facing downwards and the notched cor-
ner facing towards the slot.
3 Push the SIM card into the slot until it
clicks into place. Close the door.
Note: To remove the SIM card, press it
inwards to release and partially eject it.
Then slide it out of the slot.