CONTENTS Preface Safety Precautions Important Safety Instructions In the Carton Attaching Stand & Wall Mounting Instructions Connections and Functions Basic Installation Remote Control Remote Control Setup Basic Operation Input Source Picture Menu Sound Menu Channel Menu Lock Menu Hotel Mode Setup Menu PVR and Time Shift Operation PVR Setting...
PREFACE Thank you for building this TV! Please read this manual thoroughly before operating the TV.Make sure the TV was not damaged in transit. Should the TV is damaged, do not install it and contact your dealer. Check that you have all the accessories according to the model. SAFETY PRECAUTIONS Put the TV on a stable surface.
Page 5
SAFETY PRECAUTIONS (CONT.) Power cord and cables must be properly routed and protected to prevent people from stepping on them and causing the TV to fall. Keep the TV dry and away from humidity. Keep the TV away from heat sources. Unplug the TV before cleaning it.
Page 6
SAFETY PRECAUTIONS (CONT.) In cause of troubleshooting, do not use spare parts other than those suggested by the manufacturer. Using inadequate spare parts can lead to electric shocks, short- circuits fire or other incidents. Unplug the TV during lightening storms or when unused for long periods of time.
IMPORTANT SAFETY INSTRUCTIONS Read this manual thoroughly before first use and keep it in a safe place for future reference, along with the warranty card, purchase receipt and carton. The safety precautions enclosed herein reduce the risk of fire, electric shock and injury when correctly adhered to. Usage conditions and restrictions To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of equipment.
Page 8
IMPORTANT SAFETY INSTRUCTIONS Electrical safety, power cord and plug • Before installing this TV set, make sure your outlet voltage corresponds to the voltage stated on the appliance rating label. • To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
Page 9
IMPORTANT SAFETY INSTRUCTIONS • Do not apply excessive force to the screen when cleaning. • Do not clean the screen with water or chemical cleaners as this may damage the LED screen surface. • Do not dismantle this product by yourself, as this may cause damage. There are no user- serviceable parts contained in the TV set.
Wall Mounting Instructions ATTACHING STAND & WALL MOUNTING Wall Mounting Instructions Attaching the base Attaching the base Attaching the base Place the advice face down on a protective surface. Place the stand on the neck of the TV and Place the advice face down on a protective surface. Place the stand on the neck of the TV and Place the screen face down on a p rotective surface.
CONNECTIONS & FUNCTIONS Front and Back Connection of LED LCD TV Press “STANDBY” button to turn standby mode on or off. VOL + Press “SOURCE” to select the VOL - input source. Press “MENU” to bring up the CH + setup menu on the screen.
BASIC INSTALLATION Basic Installation Power Cord Connection Power Cord Connection - Connect the power cord correctly as shown. - Connect the power cord and power adaptor correctly as shown. - Press the STANDBY switch of your LED TV to switch the unit on. The power indicator on the - Press the STANDBY switch of your LED TV to switch the unit on.
Basic Installation (Cont.) BASIC INSTALLATION (CONT.) Basic Installation (Cont.) AV Connection AV Connection AV Connection Connect the VIDEO and AUDIO output sockets of the DVD or VCR to the AV IN sockets on the TV using the RCA cable (Yellow [video],White and Red [left and right audio]). Select the AV Connect the VIDEO and AUDIO output sockets of the DVD or VCR to the AV IN sockets on the Connect the VIDEO and AUDIO output socket of the DVD or VCR to the AV IN socket on the input source using the SOURCE button on the remote control.
Basic Installation (Cont.) Basic Installation (Cont.) BASIC INSTALLATION (CONT.) VGA (PC) Connection VGA (PC) Connection VGA (PC) Connection Connect the RGB output of the PC to the VGA socket on the set. Connect the AUDIO output Connect the RGB output of the PC to the VGA socket on the set. Connect the AUDIO output Connect the RGB output of the PC to the VGA socket on the set.
BASIC INSTALLATION (CONT.) Basic Installation (Cont.) Basic Installation (Cont.) Coax Connection Coax Connection Coax Connection Connect the Coaxial output of the TV to the C r. Your r. Your Connect the Coaxial output of the TV to the C r. Your ave the corresponding decoding functions to decode the signal coming ave the corresponding decoding functions to decode the signal coming from the TV.
: Jump to previous and next t rack in MEDIA mode. : Fast reverse and forward key in MEDIA mode. : Stop in MEDIA mode or exit the REC or TIMESHIFT mode. EPG: Launches the EPG (Electronic Program Guide) in DTV mode. GVA15GLED...
Page 18
/ / / /OK : Allows you to move, select and setup the OSD options. MENU: B rings up the main menu to the screen. EXIT: Press to close the on-screen display. VOL+/-: Volume up/down. CH+/-: Channel up/d own. GVA15GLED AUDIO: Select different audio modes.
New Zealand channel providers. However, one teletext option, “closed captions” , is still working on most New Zealand television channels. This service allows you to activate subtitles while watching normal television programs that provide it. GVA15GLED...
REMOTE CONTROL SETUP Remote Control Setup Remote Control Setup Open the cover. Open the cover. Your remote requires 2X AAA Batteries. When inserting the batteries, make sure Open the cover. Your remote requires 2X AAA Batteries. When inserting the batteries, make sure correct correct polarity marks”+”and “-”...
BASIC OPERATION Basic Operation Selecting Input Source Selecting Input Source Basic Operation Basic Operation Press SOURCE button on the remote control to display the input source list. Press SOURCE button on the remote control to display the input source list. Press button to select the input source you want to watch.
BASIC OPERATION (CONT.) Basic Operation (Cont.) Basic Operation (Cont.) Picture Menu Picture Menu Picture Menu Press MENU button to display the main menu. Press MENU button to display the main menu. Press MENU button to display the main menu. Press button to select PICTURE in the main menu, it will highlight the rst operation.
BASIC OPERATION (CONT.) Sharpness Press button to select Sharpness, then press button to adjust. Saturation Adjust the saturation of the color based on your own preference. Use in compensating colour changed with the transmission in the NTSC system. Colour Temp Press button to select Color Temperature, then press button to select.
Basic Operation (Cont.) Basic Operation (Cont.) BASIC OPERATION (CONT.) Sound Menu Sound Menu Sound Menu Press MENU button to display the main menu. Press MENU button to display the main menu. Press MENU button to display the main menu. Press Press button to select SOUND in the main menu, it will highligh Press...
Basic Operation (Cont.) Basic Operation (Cont.) BASIC OPERATION (CONT.) Balance Balance Press button to select Balance,then press OK button to enter sub-menu. Press Balance Press button to select Balance, then press OK button to enter sub-menu. Press button to adjust. Press button to select Balance, then press OK button to enter sub-menu.
Page 27
Basic Operation (Cont.) Basic Operation (Cont.) BASIC OPERATION (CONT.) udio Description udio Description Audio Description button to select Audio Description, then press button to select. button to select Audio Description, then press button to select. Press button to select Audio Description, then press button to select.
Basic Operation (Cont.) Basic Operation (Cont.) Basic Operation (Cont.) Basic Operation (Cont.) Channel Menu Basic Operation (Cont.) Basic Operation (Cont.) BASIC OPERATION (CONT.) Channel Menu Channel Menu Press MENU button to display the main menu. Channel Menu Press Press MENU button to display the main menu. Press MENU button to display the main menu.
Page 29
BASIC OPERATION (CONT.) Manual Scan button to select Manual Scan, then press Ok / Press button to enter submenu. OK:Select OK:Select Digital Manual Scan button to select Digital Manual Scan, then press Ok / Press button to enter submenu. CH 5 104.50 0-9:Input...
Page 30
Basic Operation (Cont.) BASIC OPERATION (CONT.) Basic Operation (Cont.) Analog Manual Scan Analog Manual Scan button to select Analog Manual Scan, then press Ok / Press button to enter button to select Analog Manual Scan, then press Enter / Press button to enter Analog Manual Scan submenu.
BASIC OPERATION (CONT.) Basic Operation (Cont.) Basic Operation (Cont.) Channel Edit Channel Edit Channel Edit button to select Channel Edit, then press Ok / Press button to enter submenu. button to select Channel Edit, then press Ok / Press button to enter submenu. button to select Channel Edit, then press OK / Press button to enter submenu.
BASIC OPERATION (CONT.) Basic Operation (Cont.) Signal Information Signal Information button to select Signal Information, then press Ok / Press button to select the button to select Signal Information, then press Enter / Press button to select the detailed information about the signal. Only available when there is signal under DTV. detail information about the signal.
Basic Operation (Cont.) Basic Operation (Cont.) BASIC OPERATION (CONT.) Lock Menu Lock Menu Lock Menu Press MENU button to display the main menu. Press MENU button to display the main menu. Press MENU button to display the main menu. Press button to select LOCK in the main men, it will highligh Press button to select LOCK in the main menu, it will highligh...
Basic Operation (Cont.) Basic Operation (Cont.) BASIC OPERATION (CONT.) Hotel Mode Hotel Mode Hotel Mode Press button to select Hotel Mode, then press OK / button to enter submenu. Press button to select Hotel Mode, then press Ok / button to enter submenu. Press button to select Hotel Mode, then press Ok / button to enter submenu.
Basic Operation (Cont.) Basic Operation (Cont.) Basic Operation (Cont.) Basic Operation (Cont.) Setup Menu Basic Operation (Cont.) Basic Operation (Cont.) BASIC OPERATION (CONT.) Setup Menu Setup Menu Press MENU button to display the main menu. Setup Menu Press Press MENU button to display the main menu. Setup Menu Press MENU button to display the main menu.
Basic Operation (Cont.) BASIC OPERATION (CONT.) Basic Operation (Cont.) HDMI CEC Control HDMI CEC Control HDMI CEC Control Press button to select HDMI CEC Control, then press OK button to enter submenu. Press button to select HDMI CEC Control, then press OK button to enter submenu. Press button to select HDMI CEC Control, then press OK button to enter submenu.
PVR and Timeshift Operation PVR and Timeshift Operation PVR and Timeshift Operation PVR & TIMESHIFT OPERATION PVR and Timeshift Operation PVR and Timeshift Operation PVR and Timeshift Operation PVR and Timeshift Operation PVR and Timeshift Operation PVR and Timeshift Operation PVR and Timeshift Operation PVR and Timeshift Operation PVR and Timeshift Operation...
PVR and Timeshift Operation (Cont.) PVR and Timeshift Operation (Cont.) USB Device Setup PVR & TIMESHIFT OPERATION (CONT.) Before use the Recording and Timeshift functions, you should insert an USB device and USB Device Setup format it, in the USB Host port at the connection panel of the TV set. Before use the Recording and Timeshift functions, you should insert a USB device and format USB Device Setup it in the USB Host port at the connection panel of the TV set.
PVR & TIMESHIFT OPERATION (CONT.) PVR and Timeshift Operation (Cont.) PVR and Timeshift Operation (Cont.) Timeshift Timeshift Using Timeshift function you will be able to pause a live broadcast and move backwards Timeshift Using Timeshift function you will be able to pause a live broadcast and move backwards and and forwards in the TV transmission.
PVR and Timeshift Operation (Cont.) Instant Recording PVR and Timeshift Operation (Cont.) Instant Recording PVR and Timeshift Operation (Cont.) Using Recording function you will be able to record from the DTV input. PVR and Timeshift Operation (Cont.) Using Recording function you will be able to record from the DTV input. PVR and Timeshift Operation (Cont.) PVR &...
PVR and Timeshift Operation (Cont.) PVR and Timeshift Operation (Cont.) PVR & TIMESHIFT OPERATION (CONT.) Playlist Press MENU button to access the PVR SETTINGS menu under the SETUP submenu,from this Playlist Playlist Press buttons to choose the File Manager and press OK to access. Follow the on-screen menu you may play the recorded TV programs, as well as access the scheduled recordings Press MENU button to access the PVR SETTINGS menu under the SETUP submenu, from this Press MENU button to access the PVR SETTINGS menu under the SETUP submenu,from this...
EPG (Electronic Program Guide) EPG (Electronic Program Guide) EPG (Electronic Program Guide) EPG Function -Electronic Programme Guide EPG Function -Electronic Programme Guide EPG Function -Electronic Programme Guide Let you check information about broadcasting programmes on the screen (schedules, Lets you check information about broadcasting programmes on the screen (schedules, Lets you check information about broadcasting programmes on the screen (schedules, programmes, contents description...) as well as schedule recordings and reminders.
ATV / HDMI / AV / YPbPr / PC PC Setting in PICTURE menu is available in PC Input only. Screen Mode in PICTURE menu and HDMI CEC Control in SETUP menu is available in HDMI Input only. Audio Description and Sound Type in AUDIO menu is valid only in DTV mode. HDMI/AV/YPbPr/PC mode has no CHANNEL menu.
Multi-Media Menu Operation Multi-Media Menu Operation Multi-Media Menu Operation Multi-Media Menu Operation MULTI-MEDIA MENU OPERATION Multi-Media Menu Operation Multi-Media Menu Operation Before operating USB menu, Plug in USB device, then press SOURCE button to set the Input Before operating USB menu, plug in USB device, then press SOURCE button to set the Input Before operating USB menu, Plug in USB device, then press SOURCE button to set the Input Before operating USB menu, plug in USB device, then press SOURCE button to set the Input Before operating USB menu, Plug in USB device, then press SOURCE button to set the Input...
Multi-Media Menu Operation (Cont.) MULTI-MEDIA MENU OPERATION (CONT.) Multi-Media Menu Operation (Cont.) Multi-Media Menu Operation (Cont.) Multi-Media Menu Operation (Cont.) Multi-Media Menu Operation (Cont.) Multi-Media Menu Operation (Cont.) Music Music Music Music Music Music Music Press button to select MUSIC in the main menu, then press OK button to enter. Press button to select MUSIC in the main menu, then press OK button to enter.
Multi-Media Menu Operation (Cont.) MULTI-MEDIA MENU OPERATION (CONT.) Multi-Media Menu Operation (Cont.) Multi-Media Menu Operation (Cont.) Multi-Media Menu Operation (Cont.) Multi-Media Menu Operation (Cont.) Multi-Media Menu Operation (Cont.) Text Text Text Text Text Text Text Press button to select TEXT in the main menu, then press OK button to enter. Press button to select TEXT in the main menu, then press OK button to enter.
SPECIFICATIONS MODEL GVA15GLED Panel System 15.6” (39.6cm) HD LED Panel Display Resolution 1366 x 768 Television System PAL DVB-T Aspect Ratio 16:9 Display Colours 262K Colours Contrast 500:1 Viewing Angle 90 (H) / 60 (V) Backlight Life 50,000 hours Pixel Pitch 0.252(H) x 0.252(V)
CARE & MAINTENANCE Maintaining your TV If you clean your TV carefully and regularly, it helps your TV to last longer. Make sure you turn the power off and unplug the power cord on your TV before you begin to clean it. Cleaning the screen Here’s a great way to keep the dust off your screen.
Problem Action No picture, no sound 1. Check that you have connected the TV power cord properly and switched the wall socket on. 2. Check that you have turned on the POWER button on your TV. 3. Check the picture contrast and brightness setting.
Page 52
Problem Action No Colour, poor quality colour, Change the colour setting on the PICTURE MENU. poor quality image Keep a distance between your TV and any VCR you may be using Try watching another channel. The problem may be with the channel you’re watching. Are the video cables installed properly? Change the setting of picture brightness on PICTURE MENU.
Need help?
Do you have a question about the GVA15GLED and is the answer not in the manual?
Questions and answers
Source button goes to input source with atv dtv,media,av etc etc pls help