Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Kelvin Duo
- Page 1 Wireless Wine Thermometer Model: Duo...
-
Page 3: Table Of Contents
Contents Page Introduction................. Quick start guide................. Components supplied..............Best practice................Precautions................. Battery installation..............Receiving information on the receiver base........ Using the product Turn on the receiver base..........Turn on the transmitter clip........... Transmitter clip and receiver base pairing....Colour sticker identification.......... Selecting your wine.............. -
Page 4: Introduction
The Kelvin Duo provides an easy to use reference point that will guide wine drinkers towards the optimum serving temperatures for different types of wines. Using three words on the LCD display; ‘Under, Ideal and Over’ and using LED backlight indication colours;... -
Page 5: Quick Start Guide
When the display glows green it’s within the optimum serving temperature, enjoy your wine. Please drink responsibly. Components supplied 1. Kelvin bottle clip thermometer transmitter 2. Kelvin base display unit and receiver unit 3. USB charging lead 4. Quick reference wine temperature guide (inner box) 5. Instruction manual... -
Page 6: Best Practice
Best practice Ensure the clip is always firmly registered against the exterior of the glass bottle, do not place the clip against a label. Ensure the clip is always below the level of the wine inside the bottle. When placing or removing the bottle from the refrigerator there maybe a sudden difference in the temperature reading. -
Page 7: Battery Installation
Battery installation It is necessary to fit 3x AAA batteries (not supplied) into the receiver base. Turn the receiver base over to reveal the base plate of the product. Using a suitable screwdriver carefully remove the 4 securing screws from the base plate putting them to one side. -
Page 8: Receiving Information On The Receiver Base
Using the product Turning the power on It is necessary for both the clip and the receiver base to be turned on. Turn on the receiver base: °C °F Turn the receiver base over. Use the slide switch to turn on the power Either push the switch to the left for Fahrenheit operation, or to the right for Celsius operation. -
Page 9: Colour Sticker Identification
Selecting your wine The Kelvin Duo has been pre-programmed with 10 different wine types, each has its optimum serving temperature stored: Wine Type Optimum Target Temp. (ºC / ºF) Suggested Ideal Range (ºC / ºF) -
Page 10: Selecting Your Wine
We have also provided a colour reference chart which will give you an indication as to the type of wine based on its colour. If you are still unsure as to the type of wine you are drinking please refer to the wine producer who will be able to clarify this for you. -
Page 11: Storing Your Preferences
Storing your preferences The Kelvin Duo has the ability to store the settings for 3 of your favourite wine types, saving you time if you drink a particular wine type frequently. It will also allow you to store any manual adjustments made to temperature for quick recall. -
Page 12: Clip Charging Process
Clip charging process The thermometer transmitter clip has been fitted with a rechargeable battery to avoid having to repeatedly open the sealed back plate; it also reduces the overall running cost of the unit by not having to replace batteries periodically. Use the USB charging lead supplied and plug the large USB lead into a suitable USB power supply (PC, laptop, USB PSU). -
Page 13: Receiving Information On The Receiver Base
Receiving information on the receiver base The clip will start to transmit data immediately after power up, ensure the receiver base is also switched on as detailed on page 5 to receive temperature data. Based on your previous wine selection the target temperature will be shown at the top of the LCD screen. -
Page 14: Troubleshooting
Contact details For more information about the Kelvin range please visit our web site: www.mykelvin.co.uk Kelvin Duo is a product manufactured by: Target Holdings (UK) Limited Unit 11 High March, Daventry, Northamptonshire, NN11 4HB, United Kingdom www.targetholdings.co.uk... - Page 16 www.mykelvin.co.uk Art Ref: 72002-7001-10...
Need help?
Do you have a question about the Duo and is the answer not in the manual?
Questions and answers