QNN Safe MB SERIES User Manual

Serial Number:
This package contents:
 User manual
 1 External Battery Box
 4 Bolt Down Screws
 4 AA Batteries
 2 Emergency back up Keys
Please contact your retailer or Qnn Safe Australia P/L if any shortage occurred
For the first time use, it needs the external battery power support:
 Insert the supplied 4 AA batteries into the External Battery Box
 Connect the power to the front panel. The power inlet is located on the left hand side of
the Key Pad panel.
After the safe is opened, please replace the batteries into the internal battery box,
which is located behind the door plate
 After enter the right code, Safe is now unlocked.
The factory setting for the digital code is: "1 2 3 4 5 6"
Opening instructions:
 Input 4-6 digits PERSONAL CODE, (Factory setting: 123456)
 "OPENED" displayed with 2 beeps, then the door automatically opened

code tries will be held for 15 minutes.
 After the Holding is activated, there is no way to de-activate the Holding within the
15 minutes period.
holding time in minutes
QNN SAFE AUSTRALIA PTY LTD
ABN 47 168 078 233
Unit 9 / 376 Newbridge Road, Moorebank NSW 2170
Web site:
Email:
Phone: 02-87982669
USER'S MANUAL FOR MB SERIES
Displayed with 3 beeps means it is a wrong code try. 3 continual wrong
www.qnnsafe.com.au
info@qnnsafe.com.au
then displayed to indicate the remaining
Page 1 of 2