Charging; Get Started; Charge Your Headphones; Pair The Headphones With Your Mobile Phone - Philips SHB3060 User Manual

3 Get started

Charge your headphones

Note
•
Before you use your headphones for the first time,
charge the battery for 5 hours for optimum battery
capacity and lifetime.
•
Use only the original USB charging cable to avoid any
damage.
•
Finish your call before charging the headphones, as
connecting the headphones for charging will power the
headphones off.
Connect the supplied USB charging cable to:
• the USB connector of the headphones
and;
• USB power source.
» LED turns white during charging and
turns off when the headphones are
fully charged.
Tip
•
Normally, a full charge takes 3 hours.
Pair the headphones with
your mobile phone
Before you use the headphones with your
mobile phone for the first time, pair it with a
mobile phone. A successful pairing establishes a
unique encrypted link between the headphones
and mobile phone. The headphones store the
last 4 devices in the memory. If you try to pair
more than 4 devices, the earliest paired device
is replaced by the new one.
1
Make sure that the headphones are fully
charged.
EN
4
2
Press and hold
on.
3
Press and hold
LED flashes alternately.
4
Turn on the Bluetooth function of your
mobile phone.
» The headphones are in pairing mode
for 2 minutes.
5
Pair the headphones with the mobile
phone. For detailed information, refer to
the user manual of your mobile phone.
The following example shows you how to pair
the headphones with your mobile phone.
1
Activate the Bluetooth feature of your
mobile phone, select Philips SHB3060/
SHB3080.
2
Enter the headset password "0000" (4
zeros) if prompted. For those mobile
phones featuring Bluetooth 3.0 or higher,
no need to enter a password.
10:35
Settings Connectivity Settings
Bluetooth Devices Found
Add
Philips SHB3060
Bluetooth
device
Select Select
Back
10:35
Settings Connectivity Settings
Bluetooth Devices Found
Add
Philips SHB3080
Bluetooth
device
Select Select
Back
to turn the headphones
until the blue and white
10:36
Settings Connectivity
Enter Password
****
0000
Select
Back
10:36
Settings Connectivity
Enter Password
****
0000
Select
Back
10:37
Back
10:37
Back