WebDT DS1200 Basic Operation Manual

DS1200
Options
The DS1200 has a number of optional configurations in both software and hardware. These include:
1. SSD or HDD storage
2. IR touch screen
3. Built-in 802.11a/b/g WLAN support
SPECIFICATIONS
System
Processor 1.5GHz x86
Memory (RAM) 1GB
Storage
2GB to 16GB Flash, 32GB to 64GB SSD, or HDD
Operating Systems
Microsoft® Windows® XP Embedded
Display
12" TFT-LCD, 50,000 hours lamp life
Display Resolution
1024 x 768
Network Interface
10/ 100Mb BaseT LAN; Wi-Fi 802.11a/b/g (optional)
Compatible with WebDT Content Manager (WCM) 3.2 or
Software Compatibility
above
Control Buttons
5 lower buttons : 1 power button and 4 programmable buttons
Stereo Speaker
Built-in speaker
2 USB 2.0 ports; 1 COM port; 1 Audio-out jack; 1 Microphone-in
Input/Output Ports
jack; 1 Line-in jack; 1 RJ45 connector for Ethernet
Power
AC/DC Adapter
Input: 100 – 240V AC; Output: 18.5V DC, 3.5A
Mechanical
Enclosure
ABS + PC plastics
Dimensions
9.09 x 12.1x 2.51 in/ 231 x 309 x 64 mm
(H x W x D)
Weight
8.8 lbs/ 4 kg
Environmental
IP65 sealed front IR touch panel
Water and Dust Resistance
(not applicable for non-IR SKU)
Regulatory
FCC Class B, CE, C-Tick, RoHS compliant
Temperature
Operation: 0°C - 40°C; Storage: -20°C - 60°C
Humidity
0% - 90% non-condensing
* Specifications subject to change without notice.
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2011, DT Research, Inc. All Rights Reserved. DT Research, WebDT are registered trademark of DT Research, Inc.
BOG011911DS1200ENG
4
ENGLISH signage dtri com
http://www.dtresearch.com I http://signage.dtri.com
Signage System
DS1200
BASIC OPERATION GUIDE
ENGLISH
INTRODUCTION
Thank you for acquiring the DT Research DS1200,
a 12-inch integrated computing display in one slim,
mountable package. This all-in-one signage system
is ideal for digital signage and kiosk applications.
Operating with the Microsoft® Windows® XP Embedded system, the DS1200 offers remote
management of the content and device with WebDT Content Manager and WebDT Device Manager
software. This fully integrated solution of hardware and software, with touch and point-of-service
options, facilitates efficient deployments and brings dynamic interaction to the audience.
Please take a few moments to review the contents of this document to ensure that the setup and
startup proceed smoothly. The DS1200 is ready for use, out of the box, in its default configuration
when powered by the power source provided. The following discussion offers guidance on
the hardware elements and features of the DS1200. Please refer to your device provider for
information pertaining to the software operating system or software applications.
Package Contents
• O ne DS1200 Signage System
• C/DC power adapter with power cord A
• asic operation guide B
Precautions
• Always exercise care when operating and handling the DS1200.
• N ever disassemble any portion of the enclosure, as this will void any product warranty on the
DS1200.
• o not use any AC/DC adapter other than the one provided with the device or a replacement
D
acquired from the manufacturer.
• n the unlikely event that smoke, abnormal noise or strange odor is present, immediately power I
down the DS1200 and disconnect all power sources. Please report the problem to your device
provider immediately.