Disassembly / Assembly Procedures Of Deck Mechanism - Philips 14PV120 Service Manual

DISASSEMBLY/ASSEMBLY PROCEDURES
[ 14PV120/07, 14PV125/ ( 01, 07, 39, 58 ), 14PV225/ ( 01, 07, 39, 58 ),
14PV422/ ( 01, 07, 39, 58 ), 14PV425/07 ]
Before following the procedures described below, be sure to remove the deck assembly from the cabinet. (Refer to
CABINET DISASSEMBLY INSTRUCTIONS.)
All the following procedures, including those for adjustment and replacement of parts, should be done in Eject
mode; see the positions of [41] and [42] in Fig.DM1 on page 2-4-11. When reassembling, follow the steps in
reverse order.
STEP START-
/LOC. ING
No. No.
[1] [1] Guide Holder A
[2] [1] Cassette Holder Assembly T
[3] [2] Slider (SP)
[4] [2] Slider (TU)
[5] [4] Lock Lever
[6] [2] Cassette Plate
[7] [7] Cylinder Assembly
[8] [8] Loading Motor Assembly
[9] [9] AC Head Assembly
[10] [2] Tape Guide Arm Assembly T
[11] [10] C Door Opener
[12] [11] Pinch Arm (B)
[13] [12] Pinch Arm Assembly
[14] [14] FE Head Assembly
[15] [15] Prism
[16] [2],[15] Sensor Gear
[17] [2] Slider Shaft
[18] [17] C Drive Lever (SP)
[19] [17] C Drive Lever (TU)
[7],[8],
[20] Capstan Motor
[10]
[21] [21] Clutch Assembly
[22] [22] Cam Holder (F)
[23] [23] Cam Gear (B)
[24] [24] Mode Gear
[21],[23],
[25] Mode Lever
[24]
[26] [22] Worm Holder
[27] [26] Pulley Assembly
[28] [25],[26] Cam Gear (A)
[29] [25] Idler Gear
[30] [29] Idler Arm
OF DECK MECHANISM
PART
Fig. No.
T DM3
DM4
T DM5
T DM5
T DM5
T DM5
T DM1,DM6
T DM1,DM7
T DM1,DM7
DM1,DM8
T DM1,DM8
T DM1,DM8
T DM1,DM8
T DM1,DM9
T DM1,DM9
T DM1,DM15
T DM10
T DM10
T DM10
B DM2,DM11 3(S-8), Cap Belt
B DM2,DM12 (C-1)
B DM2,DM12 *(L-6)
B DM2,DM12 (C-4), *(P-5)
B DM2,DM13 (C-2)
B DM2,DM13 (C-3), *(L-8)
B DM2,DM13 (S-9),*(L-9),*(L-10)
B DM2,DM13
B DM2,DM13
B DM1,DM14
B DM1,DM14 *(L-11)
2-4-9
REMOVAL
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
2(S-1)
*(L-1)
*(L-2)
*(L-3),*(P-1)
Desolder, 3(S-2)
Desolder, LDG Belt,
2(S-3)
(S-4)
*(P-2)
*(L-4)
*(P-3)
(S-5)
(S-6)
*(L-5)
(S-7),*(P-4)
INSTALLATION
ADJUSTMENT
CONDITION
T6410DA