BMW M3 2008 Owner's Manual page 84
Hide thumbs
Also See for M3 2008:
- Owner's manual (172 pages) ,
- Service and warranty information (54 pages)
Table of Contents
Advertisement
Select "Hour memo" and press the controller.
The hour signal is activated.
Setting the 12h/24h format
iDrive, for operating principle refer to page 16.
1.
Press the
button.
This opens the start menu.
2.
Press the controller to open the menu.
3.
Turn the controller until "Settings" is
selected and press the controller.
4.
Turn the controller until "Time / Date" is
selected and press the controller.
5.
Select "Time format" and press the control-
ler.
6.
Select the desired format and press the
controller.
Date
The settings are stored for the remote control
currently in use, refer also to Personal Profile on
page 28.
Setting the date
In the instrument cluster
To set the dd/mm or mm/dd date format, refer
to Setting the date format below.
1.
Push button 1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompa-
nied by the date and the word "SET".
Press button 2.
2.
3.
Use button 1 to set the day of the month.
4.
Press button 2 to confirm the entry.
82
Online Edition for Part no. 01 41 0 014 962 - © 02/08 BMW AG
5.
Set the month and the year in the same way.
6.
Press button 2.
The system stores the new date.
Via iDrive
iDrive, for operating principle refer to page 16.
1.
Press the
button.
This opens the start menu.
2.
Press the controller to open the menu.
3.
Turn the controller until "Settings" is
selected and press the controller.
4.
Select "Date" and press the controller.
5.
Select "Set date" and press the controller.
The first date display setting is selected.
6.
Turn the controller to make the adjustment.
7.
Press the controller to apply the setting.
The next setting is highlighted.
8.
Make the remaining adjustments. After the
last adjustment, the date is stored.
Setting the date format
iDrive, for operating principle refer to page 16.
1.
Press the
button.
This opens the start menu.
2.
Press the controller to open the menu.
3.
Turn the controller until "Settings" is
selected and press the controller.
4.
Turn the controller until "Time / Date" is
selected and press the controller.
5.
Select "Date format" and press the control-
ler.
6.
Select the desired format and press the
controller.
Advertisement
Table of Contents
