JetBlack JBT-101 User Manual page 2

WEARING THE HEART RATE STRAP
1. Adjust the strap length to a suitable personal length, making
sure it is tight enough stay in place during your workout.
2. Wet down both the electrode areas on the back of the strap.
3. Buckle the sensor into place.
4. Wrap the strap just below your chest and then clip together.
5. To ensure correct left right orientation, make sure the logo is
in upright position when you are wearing the strap.
NOTE:
• The transmitter should be positioned right below the breast/pectoral muscles. The strap
should be comfortable but secure.
• If the device doesn't receive signal from the sensor, ensure the electrode areas are wet.
• The transmitter should automatically start reading as soon as the user has it in place.
www.jetblackcycling.com info@jetblackcycling.com