Operation - Luxor BTS1200 Instruction Manual

INSTALLATION
4.8 mm
4.8 mm
Ø 10.6 mm
4.8 mm
Ø 10.6 mm
4.8 mm
4.8 mm

OPERATION

Note: If the speakers are not used for 30 minutes, they will
automatically go into standby mode (indicator will light in red).
BLUETOOTH PAIRING:
1. Activate the Bluetooth function on your mobile device.
2. Press Standby/Power button to start the speakers.
3. The Bluetooth indicator will start flashing in blue color which
indicates it is in pairing mode.
4. Find the device "BTS1200" in your mobile device and connect.
5. When pairing is completed, the indicator will light in blue. Use
the controls on the connected device or the remote control to
begin playing audio.
• The speaker will automatically connect to the previously
connected device next time you start it.
• If you want to go back to Bluetooth mode after entering another
mode, just press the Bluetooth ( ) button on the remote control.
AUX IN:
• Connect a 3.5 mm line in cable (not included) to the AUX in
terminal. Connect the other end to the audio source.
• Press Power/Standby button to start the unit. Press AUX button
and the AUX indicator will light in green.
• Use the controls on the connected device to begin playing
audio.
ENGLISH | 15