Kogan KAPWB45SLSA Quick Start Manual

Capacity: 4500mAh
•
Lifespan: up to 5000 hours
•
Input: DC 5V/1A (max)
•
Output: DC 5V/1.5A (max)
•
Dimensions: 131 x 70 x 8mm
•
Weight: 125g
•
Power
Indicator
LED
Input
Output
: before first use, please FULLY charge the Power Bank using the supplied cable.
1. Connect the Micro USB connector to the Input port on the Power Bank.
2. Connect the USB connector on the multi-lead to an empty USB port on your laptop/PC or other USB power
equipment.
3. While the Power Bank is charging, the LED indicator light will flash.
4. When the Power Bank is fully charged, all 4 LED indicator lights will stop flashing.
5. Disconnect the USB cable from the USB port and from the Power Bank.
6. Press the Power Button to see the power status. When all 4 LEDs are lit, it means the unit is fully charged.
: it is recommended that if you are not using the Power Bank for an extended period of time, the unit should be fully
charged at least once every three months.
Press the Power Button to see the power level of the Power Bank.
1 LED lights up : < 25% charged
3 LED lights up: 50 - 75% charged
Connect the multi-lead (or the original USB cable from your device) to the Output USB port of the Power Bank.
•
Connect the other end of the USB cable with the correct tip, (or the other end of the original USB cable) to
•
your device,them press the Power Button.
After charging, remove the USB cable from both devices.
•
Do not allow the Power Bank to be immersed into water or other liquids. It is not waterproof.
•
Do not press the Power Button with excessive force.
•
Do not expose the Power Bank to extreme temperatures.
•
Do not attempt to open the Power Bank or repair it yourself. Doing so will void the warranty.
•
Clean the Power Bank with a soft dry cloth only.
•
Power Button
A
Multi-lead
A – iPad/iPhone/iPod tip
B – Micro USB tip
C – iPhone 5+ tip
2 LED lights up: 25 - 50% charged
4 LED lights up: 75 - 100% charged
B C