EN 10
4.
EJ3.0U PA
4.3.7
Power Supply Board
The PSU belongs to the PDP panel. Please refer to the PDP
repair manual for more info.
4.3.8
Interconnection Board [M]
1. Unplug all connectors. Carefully unplug the LVDS
connector as it is very fragile.
2. Remove the fixation screws [1].
3. Take out the panel.
Figure 4-10 Interconnection board
4.3.9
Small Signal Board [B]
1. Unplug all connectors. Carefully unplug the LVDS
connector as it is very fragile.
2. Remove the fixation screws [1] from the connector plate.
3. Remove the fixation screws [2].
4. Take out the panel.
1
1
Figure 4-11 Small Signal Board
4.3.10 PDP Panel
1. Refer to figures "PDP panel" below.
2. Unplug all connectors to/from the panels inside the "SSB
tray".
3. Remove T10 Tapping screws [1] and T10 Parker screws
[2], and remove the metal "SSB tray" (incl. panels) from the
set.
Mechanical Instructions
1
H_17000_007.eps
260207
2
1
1
H_17000_006.eps
260207
4. You now view the PDP boards, as shown in fig. "PDP panel
[2/3]" below.
5. Remove fixation screws [3] and lift the complete PDP (incl.
the boards and wiring) by means of the mounting brackets
[4] from the set. Note: Remove these brackets [4] before
returning the defective PDP.
2
1
1
1
Figure 4-12 PDP panel [1/3]
Figure 4-13 PDP panel [2/3]
4
3
Figure 4-14 PDP panel [3/3]
1
1
H_17000_008.eps
260207
H_17000_009.eps
260207
4
H_17000_015.eps
280207