200Mbps Powerline Network Adapter HPL220 User Manual V1.0...
Page 2
Copyright Statement AirMobi is the registered trademark of Shenzhen Huaxunark Technology Co., Ltd. Other trademark or trade name mentioned herein are the trademark or registered trademark of the company. Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen Huaxunark Technology Co., Ltd. Without the permission of Shenzhen Huaxunark Technology Co., Ltd., individual or party is not allowed to copy, plagiarize, imitate or translate it into other languages. All the photos and product specifications mentioned in this manual are for references only, as the upgrading of software and hardware, there will be changes. And if there are changes, AirMobi is not responsible for informing in advance. If you want to know more information about our products, please visit our website at www.cctairmobi.com. ...
Page 3
Important Safety Instructions 1. Do not open this product or attempt to service this product, it may expose you to dangerous high voltage and other risks. 2. Do not operate this product near water. 3. Do not place or operate near or over radiator or heat register. 4. Do not expose this product to dampness, dust or corrosive liquids. 5. Do not connect this product and Disconnect from wall socket during a lightning or thunderstorm. 6. Do not obstruct this product ventilation slots, as insufficient airflow may harm this product. 7. Do not put anything on this product. 8. Plug directly into wall socket (AC 100‐240V). Do not use an extension cord between this product and the AC power source. 9. When plugging this product into wall socket, make sure that electrical socket are not damaged, and no leakage for gas or water pipes to begin with. 10. Place the connecting cables carefully so people won't stumble or walk on it. 11. The powerline adapter should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult the qualified technician. 12.
4. Select the power socket locations that you intend to place the adapter. Ensure that power socket is not controlled by wall switch, thus avoiding the possibility that the power socket will be accidentally turned off. Ensure that the adapter is not plugged into power strip, as it is possible that power strip may have surge suppression which can degrade the PLC (Powerline Communication) performance of the adapter. 5. If possible, try to ensure that the adapter is not plugged into a power socket that is near an appliance which has a motor, like a washer, dryer, blender, hair dryer etc. Such appliances have been known to sometimes degrade the PLC (Powerline Communication) performance of the adapter. If all the items listed in the previous section are verified, you may install the adapter as follows: 1. Connect one of the provided Ethernet cables to HPL220 Ethernet port. 2. Connect the other end of the Ethernet cable to your computer's LAN port. 3. Plug HPL220 to the power socket. 4. Connect the other provided Ethernet cable to the rest HPL220 Ethernet port. 5. Connect the other end of the Ethernet cable to an available Ethernet port of your ADSL Broadband Router. 6. Plug the Powerline Network Adapter into a power socket next to the computer. 7. Turn on your computer. Note: • Do not connect the powerline adapter to an extension lead, power strip, extension cord, surge protector as this may degrade the network performance. Please check and confirm that the PWR, ETH and Data LEDs on the Powerline Network Adapter ...
Chapter 5: Software Installation The AirMobi PLC Utility for Windows 98SE/Me/2000/XP/Vista/7 enables users to identify HomePlug devices within the powerline network, measures data rate performance, ensures privacy and performs diagnostics by setting user defined secure powerline networks. ...
Page 16
7. After a short while, the next screen will pop up. Click Finish, the WinPcap is successfully installed. 8. Then it will automatically install the Airmobi PPU utility. Click Next. ...
Need help?
Do you have a question about the HPL220 and is the answer not in the manual?
Questions and answers