Important Safety Instructions - I-Sniper EL-750 Installation Manual

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding-type
plug has two blades and a third grounding prong. The wide blade or the third prong
is provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11. Use only attachments/accessories specified by the manufacturer.
12. Unplug this apparatus during lightning storms or when unused for long periods of
time.
13. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as the power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
14. The power plug must be readily accessible so that the equipment can be easily
disconnected from the AC power.
15. The product is still connected to the AC power whenever it is plugged in to a live
power outlet, even if the receiver is turned off using the remote control or front
panel buttons.
16. Apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
CAUTION
– These servicing instructions are for use by qualified service personnel only.
To reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.
2
Warning and Attention Symbols
You must remember certain safety issues during installation and use of this equipment.
This guide provides various procedures and instructions. Some of these procedures
could result in injury or property damage if they are improperly performed.
Other procedures require additional attention.
In this guide, we use the following notation to inform you when you need to
pay attention to a safety or operational issue.
Designates a potential situation where the following may happen:
• Personal injury or death may occur.
• Equipment or property may be damaged.
Designates the following operational issues:
• Important operation or maintenance instructions follow.
• Additional attention is required.
For Your Safety
Designates the following operational issues:
• Important operation or maintenance instructions follow.
• Additional attention is required.
Designates the following operational issues:
• Important operation or maintenance instructions follow.
• Additional attention is required.
The Class II equipment symbol means the equipment has
additional insulation and does not need to be grounded.
3