Advertisement
PS2500 - To Open the Instrument
Disconnect the instrument from the mains.
Unscrew the four screws at the rear of instrument.
Remove the top panel in the direction as shown.
To remove the TP20 keyboard unscrew 11 screws (C) under the piano.
To remove the TP10 keyboard unscrew 8 screws (D) under the piano.
C
D
C
C
D
2
C
D
C
D
C
C
D
C
D
C
D
Remove the two locking plates (A) from the sides.
Remove the keyboard cover (slide it through the lateral guides).
To unlock the controls panel unscrew the three screws (B).
B
To remove a key insert a screwdriver or other similar object in the split at the key back, apply a light pressure and push in the direction shown.
NOTE: Before you remove a natural key you must remove the keyboard, if you remove a sharp key this operation is not necessary.
Remove the key return spring.
Unlock the key appling not much strength
NOTE: To remove a sharp key before you must remove the near natural keys.
C
C
D
A
550115
DRW
Boccato
DWG#
CKD
Riccobelli
DISK:
42
PART:
1/1
APP.
Consorte
REV:
19/12/96
B
A
GENERALMUSIC S.p.A. ITALY
PCB#
PS2500 Opening Instructions
ALL RIGHTS ARE RESERVED, NO COPIES
OR REPRODUCE THIS DOCUMENT WITHOUT
& Keyboard Disassembling
WRITTEN CONSENT BY GENERALMUSIC.
Advertisement
