Panasonic CF-71 Series Toughbook Reference Manual page 10

Security Measures
Setting the Supervisor Password
NOTE
When the User Password is set, the Supervisor Password will be needed. (
1
Run the Setup Utility
2
Using and
3
Using and
press Enter
4
<Only when the Supervisor Password has been set>
Enter your password at the [Enter Current Password], then
press Enter
5
Enter your password at the [Enter New Password], then
press Enter
To disable the Supervisor Password
Press only Enter
6
Re-enter your password at the [Confirm New Password] , then
press Enter
To disable the Supervisor Password
Press only Enter
7
At the [Setup Notice], press Enter
8
Press F10 , then select [Yes]
CAUTION
Your password will not be displayed on the screen.
Limit your password to seven characters. Note that there is no distinc-
tion between upper and lower case letters.
White colored keys can be used. Note that the space bar and function
keys cannot be used.
Do not input your password while holding down on Shift or
Use only the upper horizontal row of numeric keys to input your pass-
word.
Do not forget your password. If your Supervisor Password is forgotten you
will be unable to use your computer. Contact Panasonic Technical Support.
When running the Setup Utility, do not leave your computer even for a
short time, as the possibility exists for the password to be set/changed
by another person.
NOTE
When you do not want the User Password enabled, changed, or dis-
abled without permission,
1 using and
2 using and
(enabling, changing, disabling)
( page 39)
, select [Security]
, select [Set Supervisor Password], then
, select [User Password Protection] and press Enter
, select [Protected] and press Enter .
10
page 11)
Ctrl .