Troubleshooting - Seiki SE24FT11-D User Manual

TROUBLESHOOTING
Picture OK but no sound
• Press the VOL +/- buttons.
• Sound muted? Press the MUTE button.
• Try another channel. The problem may be caused by the
broadcaster.
No output from one of the
• Adjust the Balance settings in the AUDIO menu.
speakers
• A change in ambient humidity or temperature may result in
Unusual sound from
an unusual noise when the TV is switched on or off and does
inside the TV
not indicate a fault with the TV.
No sound when
• Check if the input source is HDMII/HDMI2/HDMI3.
connecting HDMI
• Keep the RF coaxial cable away from the other connected
Audio noise
cables.
• Select the SET Password setting in the LOCK menu, then
Lost password enter the following master password "8899". The master
password clears your previous password and allows you to
enter a new password.
• Adjust the resolution, horizontal frequency, or vertical
frequency.
The signal is out of range
(invalid format)
Vertical bar or stripe on
background & Horizontal
Noise & Incorrect position
Screen color is unstable
or show a single color
• Use Auto configures or adjust clock, phase, or H/V position.
• Check the signal cable.
• Reinstall the PC video card.
• Do not use your TV in areas that are too hot or too cold, because the cabinet may
warp or the screen may malfunction. Your TV works best in temperatures that are
comfortable to you.
• Storage temperatures are 32 ° to 122°F(0 ° to 50°C)
• Working temperatures are 32 ° to 95°F(0 ° to 35°C)
• Do not place your TV in direct sunlight or near a heat source
- 34