Specifications; Technical Features - inout HA4V-R User Manual

4

Specifications

4. 1 Technical features

Mains power............................. : 230 Vac / 50Hz or 115 Vac / 60 Hz
Consumption (during standby)..... : 1 W
Mains protection........................ : 2,50A retard fuse (3,15A retard fuse for 115Vac )
Maximum Output Level............... : 60 mW
Frequency response................... : 20 ~ 20.000 Hz (±0,1dB)
Signal to noise ratio.................... : 95dB.
Harmonic distortion.................... : < 0,1%
RMS Level / Gain....................... : 1,9 Vrms / +5,5 dBm
Input impedance........................ : 10 Kohms Unbalanced
Input sensitivity......................... : +3,8dbu (1,2v) e –5,7dbu (400mV)
Classification............................ : IP 30 in the strength of liquid and powders permeation.
Dimensions.............................. : 216x158x44mm.
Weight.................................... : 1.5 Kg.
CEE directive compliant:
Safety.................................... : 2006/95/CEE
Electromagnetic compatibility..... : 2004/108/CEE
Applied standards:
Safety
Electromagnetic compatibility
for audio devices:
Manufactured by:
HA4V-R User Manual v.1.0
(@ 32 ohm load )
130 mW
: (@ 600 ohm load )
: 10,5 Vrms / +20,5 dBm
: EN 60065
Safety limitation for electronic devices and their accessories
connected to the house power grid and analogous general use.
- Emissions - Harmonics
- Voltage fluctuations
- Radio interferences
- Immunity
Pag. 13
1kHz THD+N= 1%
1kHz THD+N= 1%
(@ 32 ohm load )
(@ 600 ohm load )
: EN 61000-3-2
: EN 61000-3-3
: EN 55013
: EN 55022
: EN 55020
: EN 55024
Noventa di Piave (VE) - ITALY