Hisense HR6TFF600SD User's Operation Manual page 10

Water Dispenser
The water dispenser, located in the
fridge door, is for storing drinking
water. With this appliance you can
obtain chilled water easily without
opening the refrigerator. You should
be informed of following tips.
Before using
Before using this appliance for the first
time, you should use it as follows.
1. Hold the two sides of the water
tank tightly, then lift up and put out
of the water tank.
2. Unscrew the head, then clean
head and the inside of water tank.
Head
Assembling
After cleaning, please assemble the
parts including the head, water tank and
lids together, then fit them on the door.
Warning!
When fitting the water tank, ensure the
head inserted into the hole first, then
hold the two sides of the water tank
tightly and fit it on the door.
Before you fill the drinking water into
the water tank, ensure that the water
tank is steady and in a correct position.
Caution!
Fill with water up to 2.5L (which is
suggested), and not above the level.
Otherwise, it may overflow when the lid
is close.
We recommend that you fill the water
by the following ways.
1. Remove the small lid and fill water
from the inlet of the large lid.
2. Remove the cover of the tank, and
then fill water inside directly.
Warning!
Don't touch other parts of the
appliance when filling water, it may
cause the water leakage.
1. Make sure the cover of the water
tank is fitted on.
2. Close the fridge door and check the
dispenser.
Hisense Refrigerator
Filling water
Small lid
Large lid
Dispensing water
Lock
10
Head