Table of Contents
Advertisement
Outputs
The following table gives details of the output connections:
Use this output
LEFT, RIGHT
BRIDGE MODE
Each channel of the 557 Stereo Power Amplifier provides twin
outputs for bi-wiring. On speakers that provide separate
connections to the bass/mid and tweeter units this allows the
units to be connected independently to the Stereo Power
Amplifier, for optimum sound quality.
Alternatively, for loudspeakers providing a single pair of inputs,
either of the output terminals can be used.
10
To connect to this
Loudspeakers of 4 to 15 , using
either plug or bare wire connections.
A loudspeaker of 6 to 15 ; see To
wire to an A500 Loudspeaker in bridge
mode, page 12.
Inputs
The following two alternative audio inputs are provided:
Use this input
To connect to this
LEFT INPUT,
A preamplifier, using phono connectors
RIGHT INPUT
and high-quality screened cable.
BALANCED INPUTS
A balanced analogue output, using
XLR connectors:
1 (Green) = GND
2 (Red)
3 (Black) = -ve
When using the balanced inputs the phono inputs should be
shorted, using the two phono shorting plugs supplied.
= +ve
Hide quick links:
Advertisement
Table of Contents
