Download Print this page
Hide thumbs Also See for GPS PULSE:

Advertisement

Quick Links

Introduction
Thank you for purchasing the GPS Pulse. This product uses an Electro-optical technology to
sense the heart beat. It has two LED beams and electro-optical cell to sense the volume of
blood under your skin.
Note that the actual color of the watch and artwork may vary from style to style.
How to wear the watch properly in your forearm:
• Fasten the watch snugly so that the optical sensor makes a tight contact with your skin.
The tighter you can wear the watch the better.
• Wear the watch not on your wrist bone but higher on your forearm.
Important note:
Before starting your exercise
You may need to tighten the strap.
**
After sweating, you have to tighten the watch again for more accurate
measurement.
Make sure the heart rate reading is already stable.
Minimize excessive wrist movement while the HR is in use
Caring for your Watch:
Clean your Watch with a dampened cloth preferably with mild detergent solution. Wipe dry
using a dry cloth. Do not use chemical cleaners and solvents that may damage plastic
components.
Do not store your Watch to prolonged exposure to extreme temperatures as this may result to
permanent damage to your unit.
Getting Started
Step 1) Know your Watch:
• This product has also a GPS function with the following main modes as you press S7:
TIME, RUN, CHRONO, TIMER, HRM, DATA, ALARM and SET mode.
Push button main function:
Caution:
• Consult your doctor before you begin a new exercise program.
• This watch provides heart rate measurements. However, this is not a medical device.
• This watch may affect pacemakers. If you have any concerns, consult your doctor
before using this watch.
Soleus GPS Pulse – User Manual

Advertisement

loading

Summary of Contents for Soleus Air GPS PULSE

  • Page 1 Clean your Watch with a dampened cloth preferably with mild detergent solution. Wipe dry Thank you for purchasing the GPS Pulse. This product uses an Electro-optical technology to using a dry cloth. Do not use chemical cleaners and solvents that may damage plastic sense the heart beat.
  • Page 2 Soleus GPS Pulse – User Manual Step 2) Charging the Battery: Charge the unit for at least 4-5 hours before first use. The length of time for a fully charged battery will last depending on the actual usage. It is recommended to regularly re-charge your battery every 1-2 months even if it is not used to maintain good battery condition.
  • Page 3 Soleus GPS Pulse – User Manual How to set the TIME: TIME 1/ Time 2 setting: Press S5 while TIME is blinking. The watch will display T1 or T2. • Press S1/S11 to choose between T1 or T2 to set.
  • Page 4 Soleus GPS Pulse – User Manual Press S5 to confirm and set the HEIGHT. Height digits will start to blink. While on NIGHT ON setting screen Press S5 to accept the ON setting. The watch will • • Press S1/S11 to change the height digits.
  • Page 5 Soleus GPS Pulse – User Manual When the chronograph is running within the Start Time/ End Time, the EL will Press S1/S11 to change the minute digit. • be always ON. It will turn OFF 10 seconds after the chronograph is stopped.
  • Page 6 Soleus GPS Pulse – User Manual 3.3) AUTO LAP, UNITS, USER, and VIEW can also be set in RUN quick SET mode. Press and hold S11 until AUTO LAP blinks. • Press S1/S11 to toggle through between AUTO LAP, UNIT, USER and VIEW.
  • Page 7 Soleus GPS Pulse – User Manual • Press S5 to set the hour, minute, T1/T2 and Alarm On/Off. Press S7 4.3.2) to enter the RUN, CHRONO, HRM, TIMER or HRM. Select GPS and press S5 to confirm. Step 4) Acquire Satellite signals: In order to get the correct time of day and begin using your watch, you have to acquire the Satellite signals.
  • Page 8 Soleus GPS Pulse – User Manual 4.4) How to turn OFF the GPS: You will hear a beep sound when the Watch has received a GPS signal or when the GPS signal has been lost. LOST GPS signal will also be displayed in the screen.
  • Page 9 Soleus GPS Pulse – User Manual 6.1.2. How to START, TAKE LAP, STOP, and SAVE: The watch will take Auto Lap based on the Distance set in Auto Lap setting. • Press S1 to start or re-start. v • Press S11to take LAP. If auto lap function is set, the watch will take lap automatically based on auto lap setting and there is a beep sound during taking of auto lap.
  • Page 10 Soleus GPS Pulse – User Manual 6.1.3. How to change views in RUN mode: 6.1.4. How to view your current data before saving while the chronograph is stopped. Following are the information as you press S5: • Press S5 while CHRONO is running to change the information displayed in Line2: 6.2) Using Chronograph mode:...
  • Page 11 Soleus GPS Pulse – User Manual 6.2.2) How to START, take LAP, STOP, and SAVE: • Press S1 to start or re-start. • Press S11to take LAP. If auto lap function is set, the watch will take lap automatically based on auto lap setting and there is a beep sound during taking of auto lap.
  • Page 12 Soleus GPS Pulse – User Manual RUN mode & TIMER mode has the same chronograph counter. When the chronograph is started or stopped in RUN mode, the same thing happens in TIMER mode. The watch has 6 interval timers segment 1 to segment 6.
  • Page 13 Soleus GPS Pulse – User Manual • Press S1 to start or re-start. Following are the information as you press S5: • Press S11to take LAP. If auto lap function is set, the watch will take lap automatically based on auto lap setting and there is a beep sound during taking of auto lap.
  • Page 14 Soleus GPS Pulse – User Manual 6.4) Using HRM mode: 6.3.5. How to set the Timer after the data is saved or reset. • While in GPS GO or INDOOR screen or in any Timer screen, press and hold S11 until SG 1 (segment 1) blinks.
  • Page 15 Soleus GPS Pulse – User Manual 6.4.2. How to change views in HRM mode: 6.4.3. How to START, take LAP, STOP, and SAVE: •   P ress S5 while CHRONO is running to change the information displayed in Line 3.
  • Page 16: General Operations

    Soleus GPS Pulse – User Manual This Watch has a Night mode function. Following are the options in SET mode and their functions: 10 SECONDS – Press S11 will turn ON the Light for 10 seconds. 20 SECONDS – Press S11 will turn ON the Light for 20 seconds.
  • Page 17: Data Mode

    Soleus GPS Pulse – User Manual Press and hold S5 again to delete all data if you select DEL ALL. • Please follow the function flow as shown. DATA mode How to enter DATA mode, view details, and delete Data: Press S7 to go to Data mode.
  • Page 18: Alarm Mode

    Soleus GPS Pulse – User Manual Data numbering system/ Legend: Sample data number: D03 03 1031 – 1 02 G Data Total number of files File number counter Month Date Refer to Time 1 or 2 for time 2 File number of the day...
  • Page 19 Soleus GPS Pulse – User Manual not seem to be accurate charge it without interruption. It is recommended to regularly re-charge your battery every 1-2 months even if it is not used to maintain good battery condition. - Make sure the HR belt is snugly fit to your body...