Wizard Overview; Tutorial 1: How To Set Up Your Network - ZyXEL Communications ZyWALL USG Series Application Note

Tutorial 1: How to Set Up Your Network

Here are examples of using the Web Configurator to set up your network in the ZyWALL.
Note: The tutorials featured here require a basic understanding of connecting to and using the Web
Configurator , see
the Web Configurator Online Help.
• Wizard Overview on page 29
• How to Configure Interfaces, Port Roles, and Zones on page 29
• How to Configure a Cellular Interface on page 32
• How to Set Up a Wireless LAN on page 34
• How to Configure Ethernet, PPP , VLAN, Bridge and Policy Routing on page 37
• How to Set Up IPv6 Interfaces For Pure IPv6 Routing on page 38
• How to Set Up an IPv6 6to4 Tunnel on page 44
• How to Set Up an IPv6-in-IPv4 Tunnel on page 48

1.1 Wizard Overview

Use the wizards to quickly configure Internet connection and VPN settings as well as activate
subscription services.
WIZARD
Installation Setup Wizard
Quick Setup
WAN Interface
VPN Setup
After you complete a wizard, you can go to the CONFIGURATION screens to configure advanced
settings.
1.2 How to Configure Interfaces, Port Roles, and Zones
This tutorial shows how to configure Ethernet interfaces, port roles, and zones for the following
example configuration.
Section 1.4 on page 10 for details. For field descriptions of individual screens, see
DESCRIPTION
Use this wizard the first time log into the Web Configurator to configure WAN
connections and register your ZyWALL.
You can find the following wizards in the CONFIGURATION navigation panel.
Use these wizard screens to quickly configure a WAN interface's encapsulation
and IP address settings.
Use these wizard screens to quickly configure an IPSec VPN or IPSec VPN
configuration provisioning.
ZyXEL – USG Application Note
82