hazeltine 2000 Operating Manual page 6

•
DAT~CORO
\
DATA CORD
DISPLAY UNIT, REAR VIEW
(SERIAL NOS. 1000 TO 10050)
DISPLAY UNIT, REAR VIEW
(SERIAL N05.120QI AND HIGHER)
/
POWER CORD
DISPLAY UNIT. REAR VIEW
(SERIAL NOS. ABOvE 220001
"-
POWER CORD
\
POWER CORD
,.
DATA CORD
•
1. Turn-On
Figure 1. Hazeltine 2000 Display Rear View
Set the power ON/OFF pushbutton on the keyboard to ON by de-
pressing it. When power is on, the keyboard pushbutton/
indicator will
be
lighted. The RECEIVE and LOCAL indicators
on the keyboard will light indicatingthat the Model 2000 is in
Ready mode. Depress reset followed by a simultaneous de-
pression of shift and clear keys. This will reset the logic circuits
to a normal state and clear any extraneous data from the screen.
Allow at least 15 seconds between power "off" and power "on"
in
the event of unit power recycling.
2
•
•
l ......;