Options; Warm Water; Extra Rinse; Child Lock - LG WD100C Series Owner's Manual

OPTIONS

After selecting a cycle, select additional features for
the load.
NOTE:
y To protect your garments, not every feature is
available with every cycle.
y If the START/PAUSE button is not pressed within
4 minutes to start the cycle, the control will shut
off and all settings will be lost.

WARM WATER

The warm water option is selected by default on the
Normal and Intimates cycles. It can be deselected
by pressing the Warm Water button. The water
temperature cannot be set on the Rinse + Spin.

EXTRA RINSE

This option add an extra rinse to the selected cycle.
Use this option to help ensure the removal of
detergent from fabrics. A chime sounds repeatedly
before the final rinse so the machine can be paused
and liquid fabric softener added, if desired.
NOTE:
y You cannot select the Extra Rinse option with the
Tub Clean cycle.
y A chime sounds repeatedly about 20 second
before the final rinse so the machine can be
paused and liquid fabric softener added, if desired.

CHILD LOCK

Use this option to disable the controls. This feature
can prevent children from changing cycles or
operating the machine. Once the Child Lock is set, it
must be deactivated before any controls, except the
Power button, can be used. Once the washer has
shut off, the Power button will allow the machine to
be turned ON, but the controls will still be locked.
When the controls are locked, CL will display
alternately with the estimated time remaining. Press
and hold the Extra Rinse button for 3 seconds to
activate or deactivate Child Lock.
NOTE: Once the controls are locked, they must be
manually unlocked to restore operation.

SPECIAL DRAIN FEATURE

This washer is equipped with a special feature that
is designed to make the washer as safe as possible.
If the washer is paused or shut off while there is still
water in the tub, the water will drain automatically
after several minutes of inactivity. This helps keep
children safe by reducing the possibility of water
remaining in the tub.
Any water remaining in the tub will automatically
drain four minutes after the washer has shut off. If
the washer is paused and the START/PAUSE button
is not pressed within 4 minutes, the washer will
shut off and all cycle settings will be lost. Any water
remaining in the tub will be drained.
The washer can be turned on or restarted any time
before the drain begins. However, once the washer
begins to drain, all controls and functions will be
disabled until the water has been completely drained
and the washer shuts off.
21
HOW TO USE