Medema Production A/S Introduction Congratulations on your new joystick G90. It will let you manage your electric wheelchair in a good and safe way. On the following pages we will examine the opportunities that lie in the joystick. Enjoy. 4 of 16 Quick guide P9-0291-Q Version 1.0.0/2011...
Medema Production A/S Using the G90T and G90A Speed selection with G90T Speed selection with G90A To start the scooter: To start the scooter: Press button 1A or use toggle Press button 1 and wait for the switch 1B battery indicator to stabilise (3-5...
Page 7
Medema Production A/S It is important to check the It is important to check the battery indicator regularly to battery indicator regularly to prevent the scooter stopping prevent the scooter stopping because of fl at batteries. because of fl at batteries. Note! If you are driving on a sloping surface with poor grip, e.g.
Medema Production A/S Selecting seat functions Selecting seat functions with the Selecting seat functions with the G90T G90A Left footrest Left footrest Seat angle (tilt) Seat angle (tilt) Backrest angle Backrest angle Seat height Seat height Right footrest Right footrest If A and E are fl...
Medema Production A/S Safety check Daily safety check: The electronic system has an integrated safety check which runs up to 100 times per minute. To supplement this check, you should carry out the following regular checks. • Switch off the electronic system (no lights in the display) •...
Medema Production A/S Troubleshooting the Dynamic Status light Status light Troubleshooting the G90T and G90A Status light fl ashes with 1 fl ash per Switch off the scooter and restart. If this cycle does not work, contact a competent service engineer. (HMC or therapist).
Page 11
Medema Production A/S Status light Status light Status light fl ashes with 9 fl ashes per Electronic fault. Contact a competent cycle. service engineer. (HMC or therapist). Status light fl ashes with 10 fl ashes per Electronic fault. Contact a competent cycle.
Medema Production A/S Programming The Dynamic electronic system is programmable so that the driving characteristics can be optimised for individual users. Programming must only be carried out by people trained in Dynamic’s control systems. Changing parameters incorrectly can produce driving characteristics that are dangerous for the user.
Medema Production A/S Charging Charging Plug the cable into the control box on the scooter. Plug the charger into the outlet or switch it on. Use the indicator lights on the charger to check that charging has started. When charging has fi nished, switch off or unplug the charger, and then remove the charger cable from the control box.
Page 14
Medema Production A/S Adjusting the height and angle using the joystick: Switch to the seat functions setting by pressing the red button. The icon for the left leg support starts fl ashing, and you can adjust it by moving the joystick up and down.
Need help?
Do you have a question about the G90A and is the answer not in the manual?
Questions and answers