KVM
EXTENDER
KVM-LΙΙ
(Local)
(Remote)
KVM-EΙΙ
USER MANUAL
Package Contents
KVM Extender Local Unit
KVM Extender Remote Unit
User manual
Power adapter DC 9V/600mA
3-in-1 cable (3L-3512C)
If any thing missed, please contact with your vendor.
Features
The extension of VGA, PS/2 keyboard, PS/2 mouse
signal up to 180 meter away by using the KVM
Extender and one CAT5 cable.
High VGA resolution up to 2048x1536.
Support Auto/Manual video quality adjustment.
Support video gain and equalization adjust.
Support 3 hot key to combine other equipment.
Compatible with the KVM-S1.
Three control privilege modes – "Share" & "Local only"
& "KB/MS disable".
Extra console port is available on Local side.
Auto console selection between Local and Remote.
-1-
Specifications
Function
PC Connector
Monitor Connector
Keyboard Connector
Mouse Connector
Mode Switch Button
RJ-45 Connector
LEDs
Video Resolution
Cable Distance
Power Adapter
Housing
Weight
KVM-RΙΙ
Dimensions(LxWxH)
Hardware Requirements
Console
V2.1
PC
Cable
x 1
x 1
KVM-LΙΙ (LOCAL) FRONT VIEW
x 1
x 2
x 1
No
CAT.5
1
Connector
2
Power LED
3
Link LED
Mode SW
4
Button
5
PS/2 Mouse
6
PS/2 Keyboard
KVM-LΙΙ
1 x HD-15 Female
(VGA / KB / MS)
1 x HD-15 Female
1 x 6 pin mini-DIN Female (PS/2)
1 x 6 pin mini-DIN Female (PS/2)
1
1
Power
1
Link
1
2048×1536@60HZ
180 m (Max.)
DC 9V 600mA
Aluminum
235 g
130x83.5x29.5 mm
Required specifications
1 x Highest resolution monitor.
1 x PS/2 mouse.
1 x PS/2 keyboard.
1 x VGA, SVGA or Multisync card.
1 x 6-pin mini-DIN (PS/2) mouse port.
1 x 6-pin mini-DIN (PS/2) keyboard port.
1 x 3-in-1 KVM cable or equivalent.
Component
Description
Plugs the CAT5 cable into this
connector.
On when the unit power on.
Off when the unit has no power.
Flash when "Local Using only".
On when links successfully.
Off when no link to Remote unit.
Flash when Remote using.
Toggle the mode switch between
"Share" & "Local only"
The PS/2 Mouse plugs here.
The PS/2 Keyboard plugs here.
-2-
KVM-LΙΙ (LOCAL) REAR VIEW
KVM-RΙΙ
None
None
No
Component
1
Power Jack
Monitor
2
Connector
3
PC Connector
KVM-RΙΙ (REMOTE) FRONT VIEW
230 g
No
Component
CAT.5
1
Connector
2
Power LED
3
Link LED
4
PS/2 Mouse
5
PS/2 Keyboard
KVM-RΙΙ (REMOTE) REAR VIEW
No
Component
1
Power Jack
Monitor
2
Connector
*
P.S. Power and Link LED flash simultaneously when
KVM-EΙΙ is in the "command mode".
Description
The power adaptor plugs here.
The VGA cable (HD-15) connects
to the monitor plugs in here.
The 3-in-1 cable to PC plugs here.
Description
Plugs the CAT5 cable into this
connector.
On when the unit power on.
Off when the unit has no power.
Flash when "Local Using only".
On when links successfully.
Off when no link to Local unit.
Flash when Local Using.
The PS/2 Mouse plugs here.
The PS/2 Keyboard plugs here.
Description
The power adaptor plugs in here.
The VGA cable (HD-15) connects
to the monitor plugs in here.
-3-
Need help?
Do you have a question about the KVM-L?? and is the answer not in the manual?
Questions and answers