Honeywell 7950 User Manual

Paging
Pager User Guide (7950)

Turning On the Pager

Inserting the Alkaline battery (AA) will turn the pager on.
If the battery is already installed, press
After a short time, the screen will go blank to preserve battery power.
Any key can be pressed to wake up the pagers screen.

Read Messages

The pager will display a new message when it is received. To read stored message press
then use the

Backlight

Press and hold any key for 2 seconds to turn on the backlight.
Press and hold any key for 2 seconds again to turn off the backlight.

Text Zoom

To enlarge text on the pager, enter the Settings Menu by pressing
Press until ZOOM is shown.
Press to confirm.

Power Off*

Enter the Settings Menu by pressing
Press until TURN PAGER OFF is shown.
Press twice to confirm.

Vibrate Only Mode

Enter the Settings Menu by pressing
Press until VIBRATE MODE is shown.
Press then press
Press to confirm.

Delete Messages

Whilst you are viewing a message that you wish to delete, press
MESSAGE is shown. Press the
*Note: Only applicable to standard pagers. Equality Act (previously known as DDA) pagers need to
have their batteries removed to power them off.
and to scroll through all of the messages.
until VIBRATE ONLY ALERT is shown.
key twice to confirm the message deletion.
for 3 seconds.
followed by until DELETE
and