Performance in tandem with portability make the Aseptico AA-98 AirPac II oilless 3/4 horsepower compressor perfect for the professional. The compressor is secured in its own pull or carrying case and includes an air storage tank, a cooling fan, and an automatic pressure switch control.
SET-UP & OPERATION 1. Unpack the compressor and locate the remote power cord. 2. Plug the power cord into the receptacle on the outside of the unit and then into a grounded power outlet. 3. To activate the AA-98 compressor, flip the power switch to the on (I) position.
MAINTENANCE: AIR STORAGE TANK - To avoid the risk of moisture in the air lines or tank failure, drain the tank after each use or every four hours of operation. This will DRAIN FITTING prevent condensation build-up and corrosion inside the tanks. To drain the tank, allow the compressor to fully pressurize and then turn the power switch to the off (O) position.
Page 6
ELECTRICAL - The motor of this compressor has a thermal overload protector. If the motor should overheat, the overload protector will shut off the motor. If this should occur, turn the compressor off immediately and allow the motor to cool. Check the circuit breakers, they may need to be reset.
Aseptico's sole obligation under product warranty is (at its sole option and discretion) to repair or replace any defective component or product in part or whole. Aseptico shall be the sole arbiter of such action.
Need help?
Do you have a question about the AA-98 AirPac II and is the answer not in the manual?
Questions and answers