Auxiliary Inputs - Chevrolet mylink User Manual

2. Open the battery door.
3. Replace the two AAA batteries.
4. Replace the battery door and
tighten the screw.

Auxiliary Inputs

Audio/Video (A/V) Jacks
1. Wired Headphone Volume
Control
2. Wired Headphone Jack
3. A/V Jacks
4. USB Port
5. SD Card Slot
If equipped with RSE, features
above will be in the rear of the
center console. These ports are for
the primary use of the rear
passengers and not all media is
available to the front passengers.
The A/V jacks allow audio or video
cables to be connected from an
auxiliary device such as a
camcorder, video game system,
or Apple device. A cable from Apple
is required.
The A/V jacks are color coded:
Yellow for video input.
White for left audio input.
Red for right audio input.
Power for auxiliary devices is not
supplied by the infotainment system.
To use the auxiliary inputs of the
RSE system:
1. Connect the auxiliary device
cables to the A/V jacks.
2. Power on both the auxiliary
device and the RSE video
screen.
Rear Seat Infotainment
3. Press Media on the remote
control and use the left or right
arrows to change the source
to AUX.
USB/SD
This allows for video and audio
playback of supported media.
Audio from these ports can only be
heard and controlled by the rear
seat passengers. Video can be
heard, shown, and controlled by the
rear and front passengers.
To use the USB and SD:
1. Insert the device into the
appropriate slot.
2. Select the source from the rear
screen menu with the remote
control MEDIA button.
3. Select the source from the front
by pressing the Video
application on the HOME
screen.
49