Monitoring Configuration Interface; Monitoring; Syslog Export - Vade Retro mailcube Administrator's Manual

8

Monitoring configuration interface

Implement real service continuity for the security of your e-mails.

Monitoring

In this section you can configure the SNMP protocol to monitor the MailCube and prevent incidents:
(see Figure 8-1)
Enable SNMP,
§
§ Select community: The community entered must be the one you have configured on
your SNMP server,
§ Select SNMP port: the default SNMP port used by the protocol is 161.
§ IP addresses authorized to connect: To secure SNMP queries sent to the appliance.
(Recommended setting: enter only your SNMP server).

Syslog export

The Syslog export function allows you to extract log files written by MailCube in real time. Reading
the logs will allow you to better analyze the behavior of e-mails when needed or as a source
of analysis for Vade Retro Technology's support.
Syslog can be enabled by selecting the checkbox "Use an external Syslog server" (Figure 8-2).
3 avenue Antoine Pinay, Parc d'activité des 4 vents, 59 510 HEM – France – RCS Rbx – Tourcoing - 509 568 416
32
Figure 8-1 Monitoring section – Activation of SNMP
VADE RETRO TECHNOLOGY, SASU Au capital de 268 831€
10C 1V2 01/11 FR