Summary of Contents for JiangYi JY-8000N
- Page 1 OWNER'S MANUAL DIGITAL CONFERENCE SYSTEM (JY-8000N) INSTRUCTION MANUAL GRACEFUL SOUND CO., LIMITED...
- Page 2 This system high function assembly conference system designed conference discussion and auto-tracking camera integrated using. It has all kinds of function; it can manage the conference discussion according to different request with different operation. This system has covered all kinds of modern conference request. It is the high integrated features, simplified installation and easy to use.
- Page 3 Free mode: all participants can speak freely, all delegate units were effected by the priority button, the operator or the chairman can open or close anyone delegate unit freely. FIFO mode: setting the number to speak in the conference hall at the same time, when the unit reaches the number, the delegated unit speak later will close the unit which opened at first automatically, keeping the number as setting at the beginning.
- Page 4 System Host JY-8000N Technology Parameter: Main Power Supply AC220V 50/60Hz orAC120V 50/60Hz Frequency Response 40Hz-16KHz Signal-to-Noise Ratio ≥90dB Dynamic Range ≥94dB THD（1K） ≤0.1% Audio Output REC Output 0.775V Sensitivity -44+/- 2dB Output Load 1KΩ Control Port With four groups of 8P-DIN sockets to connect...
- Page 5 1.3 Schematic diagram: 1． (POWER) 2． (MODE)：FREE，LIMIT（1~9） ，LIMIT（1~9） ，Board mode，PC mode 3． (NUMBER)， （1~9） 4． (SAVE) 5． LCD SCREEN 6． （TREBLE） 7． （MEDIANT） 8． （BASS） 9． （VOLUME） 10．DELEGATE（LINE） 11． （LINE OUT） 12．MIX OUT 13．TEL IN/OUT （DVD，SOUND AUDIO IN/ OUT, OTHER WIRELESS MIC） 14．DATA 15．TREBLE GAIN 16.
- Page 6 Conference Unit technology Parameter（JY-8200C andJY-8200D) Main Power Supply Power supply DC18V by system host Direction MODE Unidirectional Frequency Response 40Hz-16KHz Signal-to-Noise Ratio ≥90dB Dynamic Range ≥94dB ≤0.1% Sensitivity -44dB+/- 2dB 20-120cm The Reference Distance Of Speak Power Consume Connect Mode 8 PIN routine T type of conference system special cable Installation with inlay...
- Page 7 10) The system power supply for all the delegate units is provided by the main unit at 18 safe voltages. 11) The unit has speaking button and indicator lamp, and control the speaking state freely 12) When opening the unit for speaking, the red indicative lamp will on at the same time, and can points out the right place the speaker in.
- Page 8 the inner speaker is off, delegate can make a speech. Press the button again, the red indicator is off, delegate can listening other delegate’s speaking. b. Chairman unit: The chairman unit is the same as the delegate units except an additional priority button. When this button is put on, the chairman microphone is turn on while the delegate units are being turned off until the priority button is released.
- Page 9 and when all the speaking representative microphone were closed, the dome will automatically moves back to the standby position. 6. When without the computer, set the camera spot advanced through pressing the button in main unit board, and also set by the IR remote controller. 7.
- Page 10 15. Video port (connect the monitor) 16. POWER SOCKET (AC: 220V/50H, 110v/60HZ) 3.2 High-speed dome JY-8000CM 1. 26X Auto Focus Lens: Built-in 26X optical lens day and night. 2. Fast Rotation: The 360 degrees seamless rotation can rotate at up to 245 degrees per second;...
- Page 11 4.0 Setting-up and debugging 1． Put the conference main unit in the frame or on the table, put the representative unit on each table. Connect the “T” type line tightly according the mark “ ”, must pay attention to the mark “ ”...
- Page 12 inquiries, please contact us promptly. 5.0 Working mode setting: Press the mode button, it reveal the related words in the LCD screen, mode as following: Free, FIFO, limit, speaking number, board mode, PC mode. Press the save button after choosing, LCD screen will display “the mode has been set”;...
- Page 13 7.0 Link Picture with video function:...