Diffusion reflector BW-1645 BW-1645 Weight 4.7kg (10lbs) 6.4kg (14lbs) All Bowens products are certified by the CE mark. The CE certified mark is a declaration of conformity to the required EEC directives 89/336/EEC Other Softboxes Front diffuser BW-1641 BW-1642 Part Number...
Page 3
assembly assembly StepONE StepTWO StepTHREE StepSEVEN StepEIGHT StepELEVEN Place the Octo90 (or Octo150) canopy (1) and the casting (2) Place the casting in the centre of the canopy and insert all of Pull two sides together and hold them in place using the hook Connect the adjustment handle to the rear of the casting as (Octo90 Only) Ensure the air vent (5) on the Octo90 is on the floor ready for assembly.
Page 4
operation other softboxes Portrait Wafers Strip Wafers Hexogonal Wafers Portrait Softboxes Strip Softboxes Mounting Octobox to a Support Stand Air Vent Available in five sizes Available in three sizes Available in three sizes Available in four sizes Available in two sizes There are two ways to mount your chosen Octobox to a The Octo90 features an air vent to minimise the build-up of support stand:...