Advertisement
Package Content
Installation
Easy Trouble shooting
Features
Contents
• ATX12V v2.31 & EPS12V v2.92
If your PC system does not respond, please make following checks:
• Please make sure the power supply is not connected to the AC power cord.
• Power Supply
• 80PLUS GOLD Certified
1. make sure the AC power cord is connected firmly and the AC power switch is
• Make sure the I/O switch of the PSU is at off "O" position.
• Full Range Active-PFC
• User Manual
• Install the power supply into the chassis. (refer to your chassis manual)
turned on.
• Eup Ready
Features
• AC Power Cord
• Multi-GPU Support - 2/4 x PCI-E 6+2-pin Connector
2. Make sure all DC output connectors are connected in the right direction and
• Please refer to your motherboard user manual to confirm 20-pin or 24-pin main
• Silent 140mm Fan with Auto Speed Control
connector it needs. If 24-pin, you can plug the 24-pin main connector onto the
plugged firmly.
Input & Ouput Rating
• High Quality Japanese Primary Capacitor
Connector
3. Check whether there is any short circuit problem or defective peripherals by
motherboard. If 20-pin, please detach the 4-pin to have a 20-pin main connector
• Over Current/Voltage/Temperature/Power Protection, Under Voltage Protection and
Short Circuit Protection
then plug it onto the motherboard.
unplugging each peripheral device one at a time.
Package Content
Model
• 5-Year Warranty - One to One Replacement
• Please refer to your motherboard user manual to confirm 4-pin ATX12V or
4. If one of the above mentioned problems occurs, please remove the fault and
8-pin EPS12V connector it needs. If 8-pin, you can plug the 8-pin EPS12V connector
wait for 1-2 minutes before you turn on the PSU again. This is necessary to
ATX 20+4 pin
Connector
Input & Output Rating
onto the motherboard. If 4-pin, please detach the 4-pin to have a 4-pin ATX12V
release the latch condition of the protection circuit.
EPS12V 8 pin
5. If the PSU is still unable to power up after above checks, please contact with
connector then plug it onto the motherboard.
CAPSTONE 450
Caution
• Connect the PCI-E connector to the VGA card if needed. Please refer to VGA card
your dealer for service.
AC INPUT
PCI-E 6+2 pin
manual to confirm 6-pin or 8-pin needed.
Installation
DC OUTPUT
• Connect the SATA connector to the SATA HDD, Optical device if any.
SATA
Information
• Connect the Molex connector to devices such as Optical device,
Easy Trouble Shooting
TOTAL POWER
HDD, fan...etc.
Molex 4 pin
CAPSTONE 550
• Connect the Floppy disk connector to the floppy drive if any.
Thank you for purchasing a High-Quality Rosewill Product.
Information
AC INPUT
Floppy
• Please connect the other side of the cable to the PSU according to the instruction
Please register your product at : www.rosewill.com for complete warranty
on the PSU
DC OUTPUT
information and future support for your product.If you have any question while
Caution
• Make sure all the connectors are fully seated.
using our products, please feel free to contact us at techsupport@rosewill.com
TOTAL POWER
• Connect the AC power cord to the power supply.
• Please do not store the power supply in a high humid temperature place, or to be
CAPSTONE 650
Support Phone Number: 800-575-9885
• Turn on the power supply by pushing the I/O switch to the "I" position.
used in such condition.
Support Email: techsupport@rosewill.com
AC INPUT
• High voltages exist in the power supply. Unless authorized personnel, please
do not open the PSU cover. The warranty will be void if the cover is removed.
DC OUTPUT
• Do not insert any objects into the open ventilation or fan grill area of the power supply.
• Please use ONLY genuine Rosewill modular cables. Third party cables might not be
TOTAL POWER
compatible and could cause serious damage to your system and power supply.
CAPSTONE 750
The warranty will be voided with the use of third party cables.
AC INPUT
• The 24 pin main power connector has a detachable 4 pin connector.
This 4 pin connector is not a P4 or ATX12V connector.
DC OUTPUT
Please DO NOT force this cable in the P4 or ATX12V socket on the motherboard.
TOTAL POWER
• Cable Ties
• Mounting Screws
CAPSTONE
CAPSTONE
450
1
1
115-240VAC 10A 50-60Hz
1
+3.3V
+5V
+12V
20A
20A
37A
6
100W
444W
450W
5
115-240VAC 10A 50-60Hz
1
+3.3V
+5V
+12V
GOLD
22A
22A
45.5A
110W
546W
550W
115-240VAC 10A 50-60Hz
+3.3V
+5V
+12V
24A
22A
54A
110W
648W
650W
115-240VAC 10A 50-60Hz
+3.3V
+5V
+12V
24A
24A
62A
120W
744W
750W
www.rosewill.com
CAPSTONE
550
650
1
1
1
1
2
2
-12V
+5VSB
0.5A
3.0A
6
8
6W
15W
5
5
1
1
-12V
+5VSB
0.5A
3.0A
6W
15W
-12V
+5VSB
0.5A
3.0A
6W
15W
-12V
+5VSB
POWER SUPPLY
0.5A
3.0A
6W
15W
CAPSTONE-450
CAPSTONE-550
4
5
3
2
1
CAPSTONE-650
CAPSTONE-750
P. 2
P. 2
CAPSTONE
P. 3
750
1
P. 3
1
P. 3
2
P. 4
8
P. 5
5
P. 5
1
User's Manual
POWER SUPPLY
All rights reserved by Rosewill
Advertisement
