13. TECHNICAL INFORMATION..................18 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with the appliance for future reference.
1.2 Children and vulnerable people safety This appliance can be used by children aged from 8 • years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
ENGLISH • Dishwasher detergents are recommend only the use of original dangerous. Obey the safety spare parts. instructions on the detergent • When you contact the Authorised packaging. Service Centre, ensure that you have • Do not drink and play with the water the following information that is in the appliance.
Lower basket Upper basket 4. CONTROL PANEL On/off button Start button Program button Indicators Programme indicators Option button Display Delay button 4.1 Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Drying phase. It comes on when the drying phase operates.
ENGLISH 5. PROGRAMMES Programme Degree of soil Programme phases Options Type of load • Normal soil • Prewash • ÖKO PLUS • Crockery and cut- • Wash 50 °C • Multitab lery • Rinses • Dry • All • Prewash •...
Water Energy Duration Programme (kWh) (min) 1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of dishes can change the values. 5.2 Information for test info.test@dishwasher-production.com institutes Write down the product number (PNC) that is on the rating plate.
1. To enter the user mode press and – = rinse aid dispenser hold simultaneously Delay and Start deactivated. 3. Press Option to change the setting. until the indicators 4. Press the on/off button to confirm start to flash the setting.
ENGLISH How to activate ÖKO PLUS not come on or it flashes quickly for a few seconds and then goes off. The display shows the updated Press Option until the indicator programme duration. comes on. If the option is not applicable to the programme, the related indicator does 8.
8.2 How to fill the rinse aid CAUTION! dispenser Only use rinse aid specifically designed for dishwashers. 1. Press the release button (D) to open the lid (C). 2. Pour the rinse aid in the dispenser (A) until the liquid reaches the fill level 'max'.
ENGLISH • The programme duration starts to decrease with steps of 1 minute. Starting a programme with delay start 1. Set a programme. 2. Press Delay again and again until the display shows the delay time you want to set (from 1 to 24 hours). The indicator of the selected programme flashes.
End of the programme 1. Press the on/off button or wait for the Auto Off function to When the programme is completed the automatically deactivate the display shows 0:00. The phase indicators appliance. are off. If you open the door before the...
ENGLISH • Do not put in the appliance items • The filters are clean and correctly made of wood, horn, aluminium, installed. pewter and copper. • The cap of the salt container is tight. • Do not put in the appliance items that •...
7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A).
ENGLISH • If you regularly use short duration we recommend to run long duration programmes, these can leave programmes at least 2 times per deposits of grease and limescale month. inside the appliance. To prevent this, 12. TROUBLESHOOTING If the appliance does not start or it stops With some problems, the display during operation.
12.1 The washing and drying results are not satisfactory Problem Possible solution There are whitish streaks or • The release quantity of rinse aid is too much. Adjust bluish layers on glasses and the rinse aid selector to a lower position.