Mercedes-Benz 2009 G-Class Operator's Manual page 66

463_AKB; 2; 52, en-US
d2ureepe,
Seats
64
X
Switch on the ignition.
or
X
Open the respective door.
X
Seat fore and aft adjustment: Press the
switch forward or backward in direction of
arrow =.
X
Seat backrest tilt: Press the switch
forward or backward in direction of
arrow ;.
X
Seat height: Press the switch up or down
in direction of arrow A.
X
Seat cushion tilt: Press the switch up or
down in direction of arrow ? until your
upper legs are lightly supported.
X
Head restraint height: Press the switch
up or down in direction of arrow :.
Head restraint fore and aft adjustment
X
Adjust the head restraint to the desired
position by pushing or pulling on the upper
edge of the head restraint cushion.
2008-12-02T10:52:11+01:00 - Seite 64
Version: 2.11.7.1
Removing and installing front seat head
restraints
i Tilt the seat backrest rearward for easier
removal and installation of the head
restraints.
X
Removing: Press switch : upwards and
hold until the head restraint is fully
extended.
X
Pull out the head restraint with both hands.
X
Installing: Press switch : upwards and
hold for about 5 seconds.
X
Insert the head restraint into openings on
the seat backrest.
i
The guide bar with the detent must be on
the left.
X
Push the head restraint down until it
engages.
X
Adjust the head restraint to the desired
position.
Rear seat head restraints
G
Warning!
For safety reasons, always drive with the rear
head restraints in the upright position when
the rear seats are occupied.
Keep the area around head restraints clear of
articles (e.g. clothing) to not obstruct the
folding operation of the head restraints.