Step 3: Connect Smart Phone, Tablet Pc Or Pc With V-Linker; Step 4: Connect V-Linker To The Internet - GGMM V-Linker Setup Manual

Step 3: Connect smart phone, tablet PC or PC with V-Linker.

For Android users: open EZCast and connect V-Linker through Wi-Fi.
For iOS users: connect to V-Linker Wi-Fi, GGMM-***** from "Setting" → "Wi-Fi" and
then open EZCast software.
For Windows and Mac users: connect Wi-Fi of V-Linker first and then run EZCast
software.

Step 4: Connect V-Linker to the internet.

Open EZCast on your device, enter "Setting" → "Internet" , and then connect V-Linker
with your Wi-Fi router.
Prompt: Don't block the Wi-Fi module. Please set the V-Linker in a place with good Wi-Fi
signal since a weak signal may result in unstable connection.
3