Honda CR-V 1998 Reference Owner's Manual page 231

3. Remove the socket by turning it
one-quarter turn counterclockwise.
4. Remove the bulb from the socket
by pulling it straight out.
5. Install the new bulb in the socket.
6. Reinstall the socket. Turn it clock-
wise until it locks.
7. Test the lights to make sure the
new bulb is working.
8. Reinstall the rear light assembly
into the rear pillar. Reinstall the
three screws and tighten them
securely.
Replacing a Rear License Bulb
1. Remove the cover by carefully
prying on the edge of the cover in
the middle with a small flat-tip
screwdriver.
2. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
Maintenance
Lights
CONTINUED