Canon EOS 100D Instruction Manual page 67

(4) Drive/self-timer mode: Use the <6> dial to make the selection.
You can also select it from a list by pressing <0>.
<u> Single shooting:
<i> Continuous shooting:
<Q> Self-timer: 10sec./remote control:
<l>Self-timer: 2 sec.:
<q>Self-timer: Continuous:
(5) Flash firing: Turn the <6> dial to select the desired setting. You
can also select it from a list by pressing <0>.
<a> Auto flash : The flash fires automatically when necessary.
<I> Flash on
<b> Flash off
When using the self-timer, see the
When using <b>, see "Disabling Flash" on page 63.
If you have set Extra Effect Shot, <i> <q> cannot be set.
If you have set Background blur, you cannot use flash.
Shoot one image at a time.
While you hold down the shutter button completely,
shots will be taken continuously. You can shoot up to
approx. 4 shots per second.
The picture is taken 10 seconds after you press the
shutter button. A remote controller can also be used.
The picture is taken 2 seconds after you press the
shutter button.
Press the <W> <X> keys to set the number of
multiple shots (2 to 10) to be taken with the self-timer.
10 seconds after you press the shutter button, the set
number of multiple shots will be taken.
: The flash fires at all times.
: The flash is disabled.
C Creative Auto Shooting
notes on page 110.
67