Before The First Use; Operation - Cellini CSR200 User Manual

Spray nozzle
When pressing the spray button, water is sprayed from this spray nozzle.
Temperature control dial
Turn this dial to appropriate temperature setting varying from different garments.
Indicator light
The light is illuminated and sparkling while the iron is heating up, and then keeps on
once the iron reaches the set temperature. During ironing, the light cycles sparkling and
keeping on to maintain the set temperature.
Ceramic glide soleplate
Flat surface of the iron, which is heated electrically and pressed against textile
materials while ironing
 BEFORE THE FIRST USE
1. Remove any sticker, protective foil or storage cover from the soleplate.
2. Fill the water tank of the iron to capacity specified by the MAX level indicator.
Heat up the iron to maximum temperature and iron over a piece of damp cloth for
several minutes on the purpose of removing any residue on the soleplate.
 OPERATION
Open the water inlet cover, hold the iron in a tilted 30°position, then fill proper water into
water tank by measuring cup, better use purified water with less calcium particles or
distilled water and make sure not to exceed Max level on the tank. Close the water inlet
cover and you will hear a click if it is in the correct position.
 Connect plug to power outlet and turn the temperature control dial to MAX position to
evaporate the water on soleplate. Your desired setting depends on the fabric of
garment. Indicator will light, which indicates that the iron is heating up. Refer to Fig.1
and IRONING TIPS later.
3