Advertisement
Quick Links
Advertisement
Related Manuals for Parat PARASYNC
Summary of Contents for Parat PARASYNC
- Page 1 USER GUIDE PARASYNC for iPad Mini ® 20-unit Charging and Synchronization Dock For assistance, please contact PARAT Solutions Toll free: 866-647-5976 Email: support@paratsolutions.com 31 Waterloo Avenue Berwyn, PA 19312 T: 610-647-5976 F: 610-296-2504 paratsolutions.com...
- Page 2 PARASYNC for iPad Mini ® 20-unit Charging and Synchronization Dock Product description: Charge and sync up to 20 Apple iPad Mini devices. Two auxiliary USB ports may be used to attach USB peripherals. Power Switch Do Not Block Air Vents...
- Page 3 CAUTION 1. If using a case, use only the approved PARASYNC iPad Mini case with the PARASYNC dock. An unapproved case can result in damage to the iPad Mini and/or dock. An un-cased iPad Mini can be inserted into the dock.
-
Page 4: Case Assembly
CASE ASSEMBLY 1. Open the case. 2. Insert the flexible cover into the case bottom. Place the Ipad Mini into the flexible cover oriented as shown. Install the case top insuring all snaps are fully engaged. 31 Waterloo Avenue Berwyn, PA 19312 T: 610-647-5976 F: 610-296-2504 paratsolutions.com... -
Page 5: Case Disassembly
CASE DISASSEMBLY To remove the Ipad Mini: Insert a small flat blade screwdriver into each snap location and turn to release the snap. 31 Waterloo Avenue Berwyn, PA 19312 T: 610-647-5976 F: 610-296-2504 paratsolutions.com... -
Page 6: Operation
OPERATION Recommended device settings: Model Recommended settings when syncing with PARASYNC iPad Mini Set “ Open iTunes when this iPad Mini is connected ” option listed in iTunes on the Summary tab To charge devices: 1. Connect the AC power cord to the dock and plug into a wall outlet providing 100-240VAC, 50/60Hz, 3.5 Amps. -
Page 7: Secure Mounting
SECURE MOUNTING The PARASYNC for iPad Mini dock has features that allow for optional secure mounting to a firm surface. To securely mount the dock: 1. Verify that the mounting surface can safely support 31 pounds per mounted dock. 2. Drill four holes in the mounting surface that line up with the four #6-32 threaded inserts on the bottom of the dock (see below for locations and dimensions in inches): 3.