Specifications - Leslie 971 Owner's Manual

MOVING OR RELOCATING YOUR LESLIE SPEAKER
So as not to damage your Leslie cables, carefully unplug both ends of the cable before moving your Leslie
speaker. To prevent damage to the cabinet, it is advisable that more than one person move the speaker.
PACKING AND SHIPPING
Packing and shipping should be done by your local Leslie dealer or by a qualified mover. The speaker should
not be moved or carried on its side or upside down, as this will result in damage to the moving parts inside the
cabinet. The cabinet must be moved, carried or shipped in an upright position. The exterior should be
protected by boxing the cabinet or covering it with padding.

SPECIFICATIONS:

Leslie model 971
- Single-Channel Input
- Two speed horn and drum rotor
- Amplifier: 300-Watt RMS Total: 220-Watt RMS bass amplifier
-
- Speakers: Massive 15" woofer, world-famous Ferro Fluid horn driver
- Inputs: 11-pin Leslie connector, 1/4" Line Input jack, and foot switch jack
- Outputs: 1/4" Line Output jack suitable to drive a powered sub-woofer
- Dimensions: 41 5/8" H, 29 1/4" W, 20 5/8" D
- Weight: 149 lbs
OPTIONAL ACCESSORIES
Shown below are only a few of the available optional accessories for your new Leslie Speaker. Visit our
website or your local Leslie dealer to view all the available products to enhance your Leslie Speaker.
Model FS-10TL Foot Switch
Enable the selection of
speeds on the 971 Leslie.
Supplied with a 16' cord
with a 1/4" plug.
11-pin Leslie cable assemblies
These cable assemblies
are available in 30', 50'
and 100' lengths.
80-Watt RMS treble amplifier
Tremolo / Chorale Switch
This half-moon shaped
switch assembly is used to
control the speeds of the
Leslie speaker. Consult
your dealer for the switch
that your organ or Leslie requires.
Leslie Power Relay
This adapter will
allow you to
connect additional
Leslie speakers to
your organ.
www.hammondorganco.com
6