How To Use Panic Alarm (Available In Pe828 Only); Fm Radio (Available In Pe829 / Pe829A Only); Scanning And Storing Radio Channels - Oregon Scientific PE823 User Manual

Hide thumbs Also See for PE823:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
A large heart rate variation is an indication that the
parasympathetic nervous system has a predominance,
which generally corresponds to someone in a relaxed
state.
As for a smaller value, it indicates that the sympathetic
nervous system is active, which is related to physical or
mental stress.
HOW TO USE PANIC ALARM (AVAILABLE IN
PE828 ONLY)
The alarm will be activated when the panic alarm pin is
detached from its socket.
Pull the chord and detach the pin to activate the alarm.
To stop the alarm, simply reconnect the pin to its
socket.
If the panic alarm is activated, 1 new 23A 12V
battery used continuously, lasts approx. 15 mins. It is
recommended that you quickly test the alarm function
every time you use the pedometer.

FM RADIO (AVAILABLE IN PE829 / PE829A ONLY)

To turn the radio ON, press and hold
To turn the radio OFF, press and hold
When using the radio, make sure the earphones
are plugged in (
will appear on the screen).
SCANNING AND STORING RADIO
CHANNELS
The radio receives FM frequency between 87.5 to 108
MHz. You can store up to 5 channels.
To scan and store a radio channel:
1. Press and hold
channel has been found, press
the channel.
2. Press and hold CH to enter channel-storing mode.
3. Use
/
to select a channel number (1-5). If you
press
when channel 1 is displayed or press
when channel 5 is displayed, the unit will leave the
setting mode and go back to the main FM radio display.
11
.
.
/
to activate auto-scan. When a
/
to fine-tune

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pe829Pe828Pe826Pe829a

Table of Contents