Sony KV-28FX60A Service Manual page 12

Advanced Presetting
Captioning a Station Name
During presetting the channels are usually labelled automatically.
You can, however, individually name a channel or a video input source.
using $. Push to ".
1 Press MENU. Select the symbol
Select Installation using $. Push to " to enter.
2
Select Manual Programme Preset using $. Push to " to enter.
3 Select the programme position of the channel or the video source you wish to
label by pushing to $ or 4. Push repeatedly to " until the first element of the
position LABEL is highlighted.
Select a number, a letter, + or a blank using 4 or $. Push to " to confirm.
4
Select the other four characters in the same way.
5 Store your selection by pressing OK.
6 To label other channels or video sources repeat steps 3 to 5.
7 Press MENU to return to the normal TV screen.
Skipping of Programme Positions
In case of 100 programme positions there may be unused positions, which
you can skip in the menu Manual Programme Preset. When changing
channels with the PROGR +/– buttons they do then not appear.
You can, however, still select them using the number buttons.
using $. Push to ".
1 Press MENU. Select the symbol
Select Installation using $. Push to " to enter.
2
Select Manual Programme Preset using $. Push to " to enter.
Select the programme position you wish to skip by pushing to 4 or $.
3
Push to " to enter.
The column SKIP is highlighted.
Select ON using $.
4
5 Store by pressing OK.
6 To skip other programme positions repeat steps 3 to 5.
7 Press MENU to return to the normal TV screen.
34
Advanced Operation
Advanced Presetting
Using of Further Programme Preset
Using the menu Further Programme Preset you can
a) individually adjust the volume level of each channel.
b) improve the quality of a weak channel (picture or sound distortions) with
manual fine tuning.
Manual Programme Preset
c) preset the AV output for programme positions of those channels with
PROG SKIP SYS SEARCH LABEL
1 Off B/G C09 ARD
scrambled signals (e.g. from a Pay TV decoder). In this way a connected VCR
2 Off B/G C10 BBC
3 Off
4 Off
records the unscrambled signal.
5 Off
6 Off
7 Off
8 Off
1 Press MENU. Select the symbol
9 Off
10 Off
11 Off
Select Installation using $. Push to " to enter. Select Further Programme Preset
2
Select: Enter:
using $. Push to " to enter.
PROG SKIP SYS SEARCH LABEL
Select the programme position of the desired channel by pushing to 4 or $.
3
6 Off B/G C07 T E
Push repeatedly to " to select:
VOL (Volume Offset), AFT (Automatic Fine Tuning) or DECODER.
The selected item changes colour.
4 a VOL
Push to 4 or $ to adjust the volume level (range -7 to +7) of the channel.
Store by pressing OK.
Repeat steps 3 and 4a if you wish to adjust the volume level of other channels.
b AFT
Push to $ to select OFF. Push to " to enter Manual Fine Tuning. Push to 4 or $
to fine tune the channel (range -15 to +15). Store by pressing OK.
Repeat steps 3 and 4b if you wish to fine tune other channels.
c DECODER
Push to 4 or $ to select AV1 (Euro AV socket 1) or AV2 (Euro AV socket 2) as
output for the video source on this programme position. Store by pressing OK.
Repeat steps 3 and 4c if you wish to preset the AV output of other video sources.
Manual Programme Preset
PROG SKIP SYS SEARCH LABEL
Should you use Auto Tuning afterwards, this setting will
51 Off B/G C09 ARD
52 Off B/G C10 BBC
53 Off
be cancelled.
54 Off
55 Off
56 Off
57 Off
58 Off
5 Press MENU to return to the normal TV screen.
59 Off
60 Off
61 Off
Select: Enter:
PROG SKIP SYS SEARCH LABEL
53 Off B/G F189 - - -
On
Installation
Language/Country
Manual Programme Preset
Further Programme Preset
RGB Set Up
Picture Rotation
Personal ID
Demo
Select:
using $. Push to ".
Further Programme Preset
PROG
1
2
3
4
5
6
7
8
9
10
11
Select:
PROG
1
PROG
1
PROG
1
Advanced Operation
O
- - - - - - -
Enter:
VOL AFT DECODER
0 On Off
0 On Off
0 On Off
Enter:
VOL AFT DECODER
0
VOL AFT DECODER
-5 On
Off
VOL AFT DECODER
-5 On Off
AV1
AV2
35